2016 Ford Explorer Complaint Log

The contact owns a 2016 Ford Explorer. The contact stated while attempting to leave her residence, it was difficult to maneuver the steering wheel. The contact continued to drive the vehicle when several unknown warning lights displayed on the instrument panel. The vehicle was taken to a dealer where it was diagnosed with a power steering rack failure and needed to be replaced. The manufacturer was made aware of the failure and referred the contact to the NHTSA Hotline. The failure mileage was 70,000.

The torque converter failed in my explorer while driving, making it act like it was in neutral. Luckily I was on a small road with little traffic, and able to pull over to a side street before my car was complete undrivable. If this happened on the highway or while turning, it probably would have cause a major issue or accident. NO warning lights on my dash and NO problem codes reported on OBD scanner tool. Ford has put out their own CSP for this issue a while ago and when I asked about it they told me it was expired. How can something they know is an issue expire? Dealership repair confirmed it was the torque converter and has to rebuild the transmission. I even found a service bulletin ford release about this problem, so they know about it.

Leather dash is coming unglued near windshield and retracting towards front of dash. This is exposing a white underliner near the windshield and causing a severe glare on windshield. This condition significantly reduces visibility which is a high risk safety concern I have researched and several other Explorer owners have this same condition

The contact owns a 2016 Ford Explorer. The contact stated while at a red light, the vehicle was shaking abnormally. No warning light was illuminated. The vehicle was drivable and was driven to a dealer. The dealer replaced the motor mounts and informed the contact that the torque converter and transmission needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The manufacturer was notified of the failure and informed the contact that the VIN was not under recall for the failure. No further assistance was provided. The contact was referred to the NHTSA Hotline to report the failure. The failure mileage was approximately 97,393.

July 17, 2024 A little over a week ago steering system on my 2016 Ford Explore started making grinding noises when turning steering wheel. Steering started to feel " tighter " or stiffer when turning. There were no warning lamps or messages or other symptoms prior to the failure. Took it to the dealership where vehicle was purchased. Service advisor came out and verified there " seems " to be a problem but can't get the vehicle in until August 5. I am concerned about the danger of the steering system locking up while driving and asked him about it and advisor only said " just have it towed in " . In my opinion this is an extremely dangerous defect !!! If the steering locks up it certainly could cause the vehicle to veer into on coming traffic resulting injury or death. Who then is responsible for this defect and it IS a defect in the rack and pinion. I have been doing research about this problem and have found not just a few but many, many, customers with the same problems with repair costs ranging from $2,500.00 - $5,000.00 and apparently a huge shortage of parts 2016 Explorers.

Took my 2016 Ford Explorer in to get A/C fixed and investigate "clunking" noise heard when turning. Dealer service rep informed me that the entire rack and pinion steering assembly needed to be replaced at a cost of ~$3200. When I asked if I could just ignore it and not get the work done (as this is quite expensive), I was told that I didn't have to get the work done but, I would be in danger of losing steering control of the vehicle. Upon doing research, online, to see if this was a normal cost, I found that there were many consumers who had the same issue. Some of these dated clear back to 2017 with low mileage. This is only a year after this vehicle was released. Even if that was the 1st complaint made, Ford has had 7 years to investigate this issue and, one would hope, issue a voluntary recall to fix it since it is a major safety issue.

The contact owns a 2016 Ford Explorer. The contact stated while driving at an undisclosed speed, the "Pre-Collision Assist Unavailable" and "Cruise Control" messages were displayed. There were no warning lights illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the cruise control module; however, the dealer was unable to diagnose a failure with the Pre-Collision assist failure. The vehicle was not repaired. The manufacturer was notified of the failure but referred the contact to the NHTSA Hotline for assistance. The failure mileage was 90,000. The VIN was not available.

The contact owns a 2016 Ford Explorer. The contact stated that the vehicle was involved in a crash in 2024 that damaged the A-pillars. The contact stated that the A-pillar trims were replaced with an aftermarket part by the Auto Body shop that repaired the vehicle. The contact called the dealer and was informed that the A-pillar trim parts were not yet available. The contact checked online and determined that the VIN was not included in NHTSA Campaign Number: 24V031000 (Structure). The manufacturer was not informed of the failure. The failure mileage was approximately 50,000.

Just noticed B Pillars on both R&L front doors have become detached at the tops and I am concerned that one or both will come completely loose and fly off while driving and cause injuries or accident. No incidents or injuries to report as of yet.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated while driving at approximately 45 MPH, the exterior A-pillar trim detached and flew off the vehicle. The vehicle was not diagnosed or repaired by an independent mechanic or local dealer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated that upon starting the vehicle, the vehicle made a loud rattling sound. The contact stated that several unknown messages were displayed. The contact stated that while driving at an undisclosed speed, the steering wheel became abnormally stiff, and the vehicle became difficult to maneuver. The vehicle was taken to a dealer, where it was diagnosed with rack and pinion failure. The vehicle was currently being repaired. The contact related the failure to an unknown recall. The manufacturer was made aware of the failure and advised the contact to call the NHTSA Hotline to report the failure. The failure mileage was approximately 149,700.

The electric powered steering was making scraping-clicking noise when turning to the right. The steering rack over-extension stop came apart inside the rack enclosure. This can result in a tire scraping on metal parts inside the fender enclosure. I have 46,000 miles on this Explorer and I drive conservatively. I have learned that Ford vehicles have issues with these steering units and this part including labor is extremely expensive. Due to the safety factors I believe a recall repair or replacement for this part is in order.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was made aware of the issue and confirmed that parts were not yet available. The contact stated that the A-pillar trim had started to detach and the brackets that hold the A-pillar trim intact had started to crack. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 108,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated that while driving 45 MPH, the steering was seized and failed to return to center. The tire sensor warning light was illuminated. The vehicle was taken to a local dealer, where it was diagnosed and determined that the tie rod and steering rack needed to be replaced. The vehicle was not repaired. The manufacturer was contacted and opened a case. The approximate failure mileage was 148,996.

The contact owns a 2016 Ford Explorer. The contact stated while driving approximately 40 MPH, the accelerator pedal was depressed, and there were exhaust fumes entering the cabin of the vehicle. The contact stated that the exhaust odor entered the vehicle while depressing the accelerator pedal and was constant. The contact stated there was no warning light illuminated. The contact had taken the vehicle to a local dealer, where it was diagnosed and determined that the failure was related to Technical Service Bulletin Number: 17-0044; and the recommended that the repair be performed. The contact was advised that the vehicle was no longer under warranty. The vehicle was not yet repaired. The manufacturer was informed of the failure and referred the contact to the NHTSA Hotline to report the failure. The failure mileage was approximately 100,000.

A-pillar trim flew off while driving. Obviously could've caused harm to other drivers. Ford has not notified me of when my vehicle will be repaired. Dealership offered to repair at cost to me.

The rear camera, mounted on the lift gate, is no longer operating correctly. At times, it will flicker off and on, camera picture 'rolls', or does not work at all (black screen with error message - "camera is no longer operational, contact the dealership"). These incidents with the camera have occurred multiple times each month over the last year. When reversing in the dark especially, this becomes a major safety issue. Currently do not see a NHTSA or Ford recall for this defect.

recall 24s02/24vo31outside pillars. I witnessed it flew of my car while driving nearly hitting another car. I don't understand why the recall is taking an extended time for it to be fixed but its available for you to purchase which is $956. my question is what is the difference between the one purchased and the recall? then if purchase you'll not Offered a reimbursement!

The contact owns a 2016 Ford Explorer. The contact stated while stopped, the engine was idling rough. The contact stated that while accelerating, the vehicle was slow to respond and then jolted forward. While driving, reversing, or at a stop, the vehicle was shaking abnormally. There were no warning lights illuminated. The vehicle was taken to an independent mechanic, who determined that the failure was due to the torque converter. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was contacted and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 94,400.

The water pump failed causing all loss of antifreeze. After doing extensive research, this is a known issue and ford refuses to fix the issue. To fix the issue a large part of the engine has to be torn down to access the water pump.

The contact owns a 2016 Ford Explorer. The contact stated while driving 50 MPH, the vehicle made an abnormally loud grinding sound. The contact stated that the front end of the vehicle seized, and the vehicle started rolling. The contact was able to pull to the side of the road and noticed that the gear box had blown out. The vehicle was towed to the dealer, where it was diagnosed that the gear box had fractured and damaged the transmission front assembly. The vehicle was not repaired. The manufacturer was notified of the failure and referred the contact to the NHTSA Hotline for assistance. The failure mileage was approximately 156,000.

The contact owns a 2016 Ford Explorer. The contact stated while driving at an undisclosed speed, the front driver's side door B-Pillar trim detached and flew off the vehicle. In addition, the contact stated that the driver's side front windshield A-Pillar trim detached and flew off the vehicle. The vehicle was taken to the dealer, and the contact was informed that parts were not yet available to repair the vehicle. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) and 25V347000 (Structure); however, the parts to do the recall repairs were unavailable. The contact stated that the manufacturer exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 80,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated while driving approximately 65 MPH, the temperature gauge indicated that the engine was overheating. The contact pulled off the road and turned off the vehicle to allow the engine temperature to return to normal. The contact had not taken the vehicle to a local dealer or independent mechanic. The vehicle was not diagnosed or repaired. The contact stated that the vehicle was inspected by a mechanic and was informed that the failure was related to Manufacturer Recall Campaign Number: 21N01 for the High-Speed Cooling Fan Motor Relay (Engine and Engine Cooling). The manufacturer was informed of the failure and the contact was informed that the vehicle was no longer covered under warranty. The failure mileage was approximately 174,000.

The contact's husband owns a 2016 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000(Structure) and 25V347000 (Structure); however, the parts to do the recall repairs were not yet available. The contact stated while driving 75 MPH, the driver's side windshield exterior A-pillar trim was flapping and separated from the vehicle. Additionally, the contact stated that the driver's side door exterior B-pillar trim, where the security keypad was located was detaching. The local dealer inspected the vehicle at the contact's residence. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 93,693. VIN tool confirms parts not available.

On June 14, we drove our 2016 Ford Explorer from Tallahassee, FL to Boone, NC without issue. However, on [XXX], upon starting the vehicle, we noticed a gasoline smell. Concerned for our safety, we checked the car before leaving the neighborhood and discovered fuel pouring from the front. We parked the vehicle in a safe location and coordinated a tow to the local Ford dealership and were informed our fuel line had ruptured. The vehicle had 41,000 miles at the time of the incident. We were not given a clear explanation for the fuel line rupture, leaving us apprehensive about the safety and reliability of Ford vehicles. The ordeal cost $4,000 in repairs, and the service experience made us feel taken advantage of after we were routinely asked if we were local. Our Ford mechanic in Tallahassee later mentioned that labor charged by the Boone dealership seemed excessive. Additionally, they refused to replace the gasoline-covered cabin air filter and engine cover, raising further concerns about the service provided. The rupture of the fuel line posed a severe safety risk as it could have led to a fire or explosion, endangering the lives of the occupants and others nearby. The problem has not been reproduced but was confirmed by the local Ford dealership. No inspections have been conducted by the manufacturer, police, or insurance representatives to our knowledge. There were no warning lamps, messages, or other symptoms of the problem prior to the failure. Our gas tank was nearly full the morning of June 17, and it was empty when we picked it up from the Ford dealership after repairs were completed. Given the serious nature of the fuel line failure, the potential risks involved, and the financial burden of the repairs, we believe this issue warrants a recall investigation to prevent future incidents and to ensure the safety of Ford customers, especially given the multiple recalls already issued and the shared “significant safety concern” shared by the NHTSA on this. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that the passenger's side and driver's side windshield exterior A-pillar trims had separated from the vehicle. The vehicle was taken to the dealer, where it was inspected, and pictures of the failure were taken. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was unknown. VIN tool confirms parts not available.

Since March of 2024, this vehicle has been waiting on parts to correct Ford recall 24S02. The dealerships are even frustrated with dealing with customers. They started telling us there is nothing they can do and send us on our way only saying our name is on a list. In the summer of 2024, the A pillar trim dislodged and nearly hit another car at highway speed but luckily did not cause an accident. This has been tagged as a SAFETY recall so how is it that we are allowed to drive around without a part replacement or the potential for them to dislodge and hit another driver for now 2 yrs? (B Pillar Recall in 2025 and still attached) I would like an explanation on how this has been allowed to go on this long. What are the limitations for a safety recall and why does Ford and NHTSA allow drivers to operate their vehicles with known safety hazards attached to their vehicle? I see these vehicles all over the road with parts still attached or one side missing. This particular vehicle has been inspected by Ford, but we were allowed to drive off with recalled part, B side still attached for now, and still 2 years later, no option for replacement.

The contact owns a 2016 Ford Explorer. The contact stated while driving at an undisclosed speed, the vehicle lost motive power and was not able to exceed 50 MPH. The contact stated that the check engine warning light had been illuminated for over 3 years. t uThe vehicle was taken to a dealer to be diagnosed and the contact was informed the engine needed to be replaced due to the rear turbo causing damages to the front turbo and the engine. The vehicle was not repaired. The vehicle was then taken to an independent mechanic where it was determined that the turbos needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure; however; the contact was informed that the vehicle was nonder recall and that the vehicle was out of warranty. The failure mileage was approximately 97,000.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 25V347000 (STRUCTURE); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact’s husband owns a 2016 Ford Explorer. The owner received notification of NHTSA Campaign Number: 25V347000 (Structure). The contact stated that while driving at an undisclosed speed, her and her husband observed that the driver’s door trim had partially detached. The vehicle was steered to the side of the road, and tape was used to secure the driver’s door trim piece. The vehicle was taken to the dealer, and the contact was informed that parts were not yet available for the recall repair. The manufacturer was not notified of the failure. The failure mileage was unavailable.

The contact owns a 2016 Ford Explorer. The contact stated while driving 50 MPH, the front driver’s side and front passenger’s side A-pillar trims detached and fell on the road. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 40,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated that while driving at an undisclosed speed, the temperature gauge indicated that the engine was overheating, prompting the contact to pull over to the shoulder of the roadway. After a visual inspection, the contact observed that the coolant reservoir was empty. The overheating warning light was illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the water pump. The vehicle was repaired. The manufacturer was not notified of the failure. The failure mileage was 78,000.

The contact owns a 2016 Ford Explorer. The contact stated while driving at an undisclosed speed, the contact became aware of a whistling sound coming from the front windshield. The vehicle was taken to the dealer where it was diagnosed with a fractured front windshield exterior A-pillar trim. The contact was informed that the front windshield exterior A-pillar trim needed to be replaced. The vehicle was not repaired. The contact was informed that parts were not available to repair the vehicle. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 70,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 25V347000 (Structure); however, the parts to do the recall repairs were not yet available. The contact stated while driving 70 MPH, the passenger’s side A-pillar trim detached from the vehicle. The local dealer was contacted; however, the vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 50,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that the passenger's side and driver's side windshield exterior A-pillar trims had detached. The contact stated that while driving 65 MPH, the A-pillar trim started flapping. The local dealer was not contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 120,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated that while driving at an undisclosed speed, the driver's side front windshield A-Pillar trim detached and flew off the vehicle. The contact stated that the detached trim struck the vehicle that was following behind the contact's vehicle. In addition, the contact stated that, due to the failure there was a loud whistling sound while driving the vehicle. The contact stated the vehicle was previously taken to the dealer in 2024; however, the contact was informed that the parts were not available to repair the vehicle. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was 86,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure) however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the passenger's side front windshield trim detached and flew off. In addition, the driver's front side windshield trim had also detached. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 149,000. VIN tool confirms parts not available.

water pump failure at 60K miles on a 2016 ford explorer, this model has the most reported water pump failures on record. this is a 15 hour repair job at the dealer, and the same complaint litters the internet. The failure on my vehicle was confirmed by dealer, $4k to fix. Not to mention the mess in my driveway where the coolant expelled without notice. If I drive it, the engine will be damaged, and there goes my car. In 2020 NY and MI class action lawsuits over this issue were settled & closed WITH payment to plaintiffs, yet no recall. WHY? too expensive for Ford? We see safety recall on clips yet nothing on an admitted engine problem than causes stalling or engine damage while running? There's a class action in Canada. Ford is dodging a known defect. Please do something about this.

The water pump failed vehicle only has around 105,225 miles on it. This has been a known issue with the 3.5L Twin turbo ecoboost. The water and coolant continuously coming out happens to be on the alternator which has caused it to short out and no longer be working properly. There has not been any kind of malfunction or warning lights for any of the issues and because of the way ford designed the water pump to be inside the motor working off the timing chain it turns into what the book lists at 14-15 hours to complete. The motor has to come out taken apart to replace the water pump and with that not just one but both timing chains have to be set again which adds additional hours for the repair and of course more money to take it to a ford shop to have it fixed the rough estimate which they said did not include the labor for the timing chains being set nor the price of any of the parts needed as I have already purchased them myself so only labor for the water pump (not including timing chains) is about $4,350.00 + tax of course but they said that would increase because of the labor for the timing chains that you have no option or choice regarding having to work on them or not because of the water pump. oh and none of that includes rental fees while repaired nor the price to get and replace the alternator and labor for that. so my guess would be somewhere around $6,000 give or take to fix this disaster and Ford does not care about their known failed design and flawed water pump issues and expect someone to be able to fork out that kind of money instead of trying to help fix there issue.

The contact owns a 2016 Ford Explorer. The contact received notification of NHTSA Campaign Number: 24V031000 (Structure); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the front driver's door trim panel detached, and the keyless entry keypad wiring became exposed. The "Door Ajar" message was displayed. The failure prevented the rear liftgate from opening as needed. The dealer was made aware of the failure but confirmed that parts were not yet available. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was 66,205. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated that while her husband was driving at an undisclosed speed, the temperature gauge started to indicate that the engine was overheating, prompting him to pull over to the shoulder of the roadway to allow the engine to cool down. No warning lights were illuminated. The vehicle was taken to the dealer, who diagnosed a failure with the water pump. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 98,000.

The contact owns a 2016 Ford Explorer. The contact stated while driving 60 MPH, the passenger’s side glove box console detached. There was no warning light illuminated. The vehicle was taken to the dealer but was not diagnosed. The contact was informed that the glove box console needed to be replaced. The vehicle was not repaired. The contact was concerned that he could have been involved in accident or severely injured due to failure. The manufacturer was not made aware of the failure. The failure mileage was approximately 80,000.

Check engine light came on. Took it to the shop and found out that the Cadillac converter needs to be replaced which will be more than 2000.00. I found that there was a recall in 2021 for the same problem.

The contact owns a 2016 Ford Explorer. The contact stated while driving 25 MPH, the vehicle failed to exceed 25 MPH or shift out of 1st gear. Additionally, the contact stated that while shifting to reverse(R), the vehicle failed to respond as needed. There was no warning light illuminated. The contact stated that the failure had been recurring. The vehicle was taken to the dealer, where it was diagnosed that the transmission had failed and needed to be replaced. The vehicle was not repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 56,000.

Trim on driver side windshield flew off while driving. ordered Replacement, 2 weeks after i replaced the driver side the passenger side has fallen off while driving. I have not yet ordered the passenger side yet but today while driving home down the interstate the driver side that was just replaced less than 30 days ago flew off again. Being on the interstate it hit my windshield and flew over and hit a truck traveling behind me who swerved I do not know if it did any damage to his vehicle neither of us stopped ( We were on the interstate but I did notice he swerved luckily did not hit any other vehicle. However now I am hearing a whistling I just got home to do some research and see this is in an ongoing issue but what do I do? order and replace again this will be 3 sets in less than 60 days. this site says there is not a known fix yet?

Steering started grinding in the winter months around 110,900 and locked up while driving. Took to Ford Service and the Rack and Pinion is faulty. The tech said it was not due to any driving damage, but a faulty part. Vehicle currently has 120,000 miles on it and locks up driving down the road. The potential for a dangerous accident is high. This is a known issue for Ford Explorers in various years and Ford should recall this.

The contact owns a 2016 Ford Explorer. The contact stated while driving 55 MPH, the contact heard a loud clanking noise coming from the transmission. There was no warning light illuminated. The vehicle was taken to an independent however, the vehicle was not diagnosed or repaired. The vehicle was taken to the dealer to be diagnosed. The contact was informed that the flex plate was cracked, causing transmission failure. The contact was informed that the transmission needed to be replaced. The vehicle was repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 90,060.

The contact owns a 2016 Ford Explorer. The contact stated that the exterior A-pillar trim had detached from the front windshield and the metal studs were showing. The contact stated that the seat belt light warning light was illuminated. The contact received notifications of NHTSA Campaign Numbers: 24V031000 (Structure) and 25V347000 (Structure); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was approximately 50,000. VIN tool confirms parts not available.

The contact owns a 2016 Ford Explorer. The contact stated that the front windshield A-pillar trim had detached. The contact received notification of NHTSA Campaign Numbers: 24V031000 (Structure) and 25V347000 (Structure). The contact's mother was concerned about driving the vehicle. The local dealer was contacted and confirmed that parts were on back order. The contact called another local dealer, Stivers Ford South (4355 Jonesboro Rd, Suite B, Union City, GA 30291), and the dealer confirmed that parts were not available. The vehicle was not diagnosed or repaired. The manufacturer was contacted and confirmed the recall status. The failure mileage was approximately 35,000.