2024 GMC Yukon Engine Problems

On March 14th the 6.2L engine was making a loud noise so I took it straight to the dealership and dropped it off. It was determined to be a failed engine. I have not been able to use my vehicle for 5 weeks now.

We were driving on the highway when the service lights came on along with the check engine light started flashing. The truck sounded like it hesitated a little, but the lights turned off and it drove his normal. We exited the freeway as we were close to home came home, parked it turned it off and turned it back on to test it, and it hesitated to turn on so we took it straight to the dealership where they repeated the issue. We left it there. They did not call me so I went up to the dealership the following day to check on this and I had not heard from them they told me why they were on the test drive that the engine had locked up. My vehicle was a part of the initial recall. They told me that it passed the inspection and they changed the oil to the new oil that was required and now at 12,000 miles my engine has failed

I have a 2024 GMC Denali that had an engine service appointment in September 2025 for the engine recall where they did an oil change & put in performance grade oil & scoped my engine. Rochester Serra GMC said they sent all the engine pictures to GM and my engine was okay according to them. After that appointment in November my engine light went on and my Denali was leaking oil in my driveway. We took the truck back to Serra GMC Rochester and they replaced the oil filter that they said was defective & an oil change was done after my husband requested that just filling up the oil was not okay. They also told us the engine light didn’t show up on their computer system and it must have cleared out, so nothing was done for that. Today 1/25/26 now about a month later my engine light is back on and has remained on with multiple starts. This is not acceptable and needs to be investigated and I want this escalated. I do not feel comfortable driving my truck with this engine light on with a known engine propulsion recall that has no actual cure. The oil replacement and cap change has done nothing and engine light remains on. I just don’t want to hear the same thing that the computer must have cleared the error code. My engine light is on for a reason and I’m asking for a thorough diagnostic test to be done by a certified technician and a get a valid explanation of why my engine light keeps going on & not just changing my oil or waiting for something catastrophic to happen to me or my family. GM is putting me and my family at risk by saying that my truck’s engine is fine when clearly the engine light keeps repeatedly going on for 3 months in a row now since November 17, 2025.

Driving down the inter state lost power and RPM raised, oil light came on and said to shut off. We checked the oil it was fine. Got back on the road then a knocking started and the vehicle shut off. I tried to start again and it wouldn’tand hour or so later it started and was knocking bad, I turned it back off. called tow truck driver to have it towed to the dealership.

The contact owns a 2024 GMC Yukon XL. The contact stated that while driving at 70 MPH on the highway and attempting to accelerate around a possible drunk driver traveling on the roadway, the vehicle failed to respond as needed. The driver was able to pull over safely. There were no warning lights illuminated. The contact called 911 and called for Roadside Assistance, and the vehicle was towed to a local dealer, where it was diagnosed with an engine failure. The vehicle was not repaired. The vehicle was previously taken to the local dealer to be repaired under NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling). The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 32,000.

My vehicle failed the Picotest that GM is conducting on the engine. It is currently sitting at Romain GMC in Evansville Indiana. I am not sure if I was at risk but the dealership says it's unsafe to drive so my assumption is that my safety was at risk. The dealership states that it will take 3 months before a new engine is installed. There were no symptoms leading up to this recall inspection.

****This complaint is an addendum to ODI Complaint #11715415 **** This report updates the prior complaint to reflect complete engine seizure and pending engine replacement following post-repair loss of propulsion. I respectfully request that NHTSA include my vehicle’s failure in its ongoing evaluations related to L87 engine failures, including Recall 25V-274, Engineering Analysis EA25007, and Recall Query RQ26001. My 2024 GMC Yukon XL Denali experienced progressive internal engine failure beginning at approximately 61, 975 miles. First attempt: The vehicle required camshaft and lifter replacement due to internal mechanical damage. Immediately after 4.5 week repair, the vehicle suffered sudden loss of motive power at highway speed.  The engine shut down without warning at 75 mph with children in the car. (Car was in owners possession for no more than 15 hours, and was driven 25 miles on the highway when it switched to neutral and shut down). Second attempt: The vehicle was towed back to the dealership. Additional electrical repairs were then attempted. (Fuse box) It shut down again during dealer testing. Third attempt: Subsequent internal inspection revealed cylinders 5 and 6 seized, requiring full engine replacement. This represents: • Repeated loss of motive power • Escalation from top-end failure to catastrophic lower-end seizure • Failure occurring immediately after dealer-performed repair(s) • A 2024 model-year vehicle with relatively low mileage Given NHTSA’s ongoing investigations into post-remedy failures (RQ26001) and out-of-scope bearing failures (EA25007), I request that this incident be evaluated as part of the broader defect pattern analysis.

I bought my truck on 10/29/25 on 12/04/25 haven’t even maid my first payment on the truck yet and my wife was on her way to work at 4 am when the engine shut off on its own and went in to neutral. She tried starting the truck again and it wouldn’t so she had to leave the truck abandoned in the middle of the road and walk to work in the cold and dark. We ended up getting the truck towed home a few hours later when there was a tow truck available. I work out of town so on 12/07/24 when I got back in town I started the truck up and everything seemed normal so I took it for a spin and right as I was getting on the highway it lost propulsion, engine shut off, and truck shifted on its own to neutral. I was almost rear ended by the truck behind me luckily I was able to get the truck out of the way in time. I had to sit and wait for 3 hours until a tow truck was able to tow the truck. This was on a Sunday so I could not get it dropped off at the dealership due to them being closed until the next day! Finally I got it towed to the dealer (all tow’s paid out of pocket as well)… 3 days later the dealer calls me back to let me know I’m getting a new engine not sure how long it will take, but they will get me a rental mean while and that’s all.

See attached document for complaint.

Oil consumption, vehicle is using 1 quart minimum every 2000 miles, has been through 3 service cycles in 17303 miles due to this issue. Has had recall test done by Morehart GMC in Durango, CO as well as oil consumption test completed by same dealership. The first time this occurred the vehicle was taken to Hi Country GMC in Farmington, New Mexico, USA, where the service manager blamed the issue on driving.

The contact owns a 2024 GMC Yukon. The contact stated that while driving at an undisclosed speed, there was an abnormal burning odor entering the vehicle from the engine compartment. There was no warning light illuminated. Upon inspection, the contact observed that the vehicle was burning oil. The dealer was contacted, but the vehicle was not diagnosed or repaired. The contact expressed concerns that the issue might be related to carbon monoxide entering the engine compartment and cabin, which could pose a serious safety hazard. The manufacturer was made aware of the failure. The approximate failure mileage was 28,750.

The contact owns a 2024 GMC Yukon XL. While the contact's wife was driving at an undisclosed speed, the accelerator pedal was depressed; however, the vehicle failed to accelerate as intended. In addition, the contact's wife noticed an abnormal knocking sound before the engine seized. The check engine warning light illuminated. The vehicle was towed to the dealer, where it was diagnosed and DTC: P0305 (lifter on cylinder 5); was retrieved, and the intake valve detached and damaged the camshaft. The contact was informed that the lifters and related parts, camshaft, and the coolant pump needed to be replaced. The vehicle was repaired; however, the failure reoccurred. The vehicle was taken back to the dealer where it was diagnosed with engine failure due to the metal shavings found in the oil. The contact was informed that the engine needed to be replaced. The vehicle was not diagnosed. In addition, the failure had occurred within 2,500 miles of the initial repair. The manufacturer was made aware of the failure ,and a case was filed. The failure mileage was approximately 14,589.

The contact owns a 2024 GMC Yukon XL. The contact stated that while driving at 70 MPH, the vehicle lost motive power and decelerated. The contact was able to coast over to the side of the road. The vehicle was towed to the dealer and was diagnosed with crankshaft and rod bearing failure. The vehicle was previously included in NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); however, it was determined that the engine was not defective and did not need to be replaced. The vehicle was scheduled for engine replacement, but had not yet been repaired. The manufacturer was informed of the failure, and a case was opened. The failure mileage was approximately 24,000.

While driving on the interstate, I felt the engine "slip". Immediately afterwards, I heard a load knocking noise from under the hood, the check engine light came on, and the vehicle lost power. I was able to pull off the interstate. Called a towing company and got the vehicle towed to a GMC dealer. The dealership diagnosed the vehicle and noted a critical issue with the engine and transmission. Dealership recommends engine replacement. Vehicle is less than a year old with 15,400 miles on the odometer. This particular vehicle is not impacted by the GMC recall on their engine, however is has the same engine failure.

It’s been 7 months of the recall and dealers are not sending repair notices/remedy how IS GM allows to take 7 months this is an untimely manner yall need to investigate further and issue buybacks I contacted GM saying the engine is making noise they they I HAVE TO PAY FOR VEHICLE INSPECTION…THAT IS ILLEGAL

The contact owns a 2024 GMC Yukon. The contact stated that while driving at a slow speed in the driveway, the vehicle inadvertently lost motive power but immediately restarted. After restarting the vehicle, the vehicle briefly returned to normal functionality, but the failure became a regular occurrence. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling). The VIN was included, but parts were not yet available. The manufacturer was notified of the failure, a case was opened, and the contact was referred to the NHTSA Hotline for assistance. The failure mileage was 26,000.

Misfiring, blue smoke and black smoke coming out the tail fight engine problem 6.2 L87 engine

The contact owns a 2024 GMC Yukon. The contact received notification of NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The contact stated that occasionally while driving at various speeds, the vehicle temporary lost automotive power. No warning light was illuminated. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The failure mileage was approximately 18,163. VIN tool confirms parts not available.

The contact owns a 2024 GMC Yukon. The contact stated while starting the vehicle, there was a loud knocking sound coming from the engine compartment. There was no warning light illuminated. The contact received notification of NHTSA Campaign Number: 25V274000 (Engine and Engine Cooling); however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer but was not diagnosed or repaired. The dealer informed the contact that authorization was needed from the manufacturer to complete the inspection of the vehicle. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure and a case was opened. The approximate failure mileage was 21,116. VIN tool confirms parts not available.

While driving back home on the interstate the vehicle suddenly started making a loud clicking noise and came to a stop, luckily I was not hit. I was able to turn it back on drive it slowly with very little power to a safe spot.