2010 Honda Element Suspension Problems

Rear trailing arm attachment point to frame is rusting out and will cause the trailing arm to detatch from the frame. Vert little rust anywhere else on the car. This is a wide spread issue and very common with this model. Why is honda not taking this serious?

Left rear trailing arm rusted right out of the mount while driving. I was driving about 10 mph off of a two-way stop, crossing the intersection of [XXX] (straight, no turn) As I got through the intersection the back left end dropped, something metal scraped and halted my vehicle. I did not run over any bumps or potholes. It just happened with no external cause. It was my rear tailing arm dragging on the road (see pictures). Which had detached from the arm mount above. Luckily, I was no longer on the highway when it happened. Had I been driving at 55 or 60mph it would have caused a serious accident, which is very scary. The vehicle is in great condition otherwise. It recently had new tires put on and an oil change, so I know folks were under there less than 3 months prior. After research, I now know that this issue is a regular complaint of those who own Honda Elements in northern climates, so much so that in Canada there was a recall on the models 2003-2010. I don't know why there hasn't been a recall or lawsuit in the United States, as this was a very rapid, dangerous on-the-road failure. There were no visible warning signs or statements issued by Honda to be on the lookout for this, and the most troubling aspect is that it was likely rusting from the top of the mount down, which is why it doesn't spark alarm by repair shops and tire changes. I am calling my insurance today to talk it over. I'm grateful for my safety and others in this situation, but fear that it has not worked out that way for someone else. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My name is [XXX] and I am the owner of this vehicle. On [XXX] 2024, my daughter was driving this vehicle at approximately 30 miles per hour when the drivers side rear trailing arm separated from the frame and caused the tire/wheel to destabilize and hung crooked from the side of the rear of the vehicle. It appears that the frame around the trailing arm mount rusted completely away. My daughter lost control and luckily was able to maneuver the vehicle to the side of the road. Evidently, there is a recall from Honda in Canada for this issue, but not in the U.S. This is very dangerous and my daughter is very lucky that the catastrophic failure didn't happen when she was on the highway. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

I've been informed by my mechanic of excessive rust on the rear suspension. The car will not pass state inspection due to safety issues related to this. An appointment has been made with the Honda dealership to confirm. Honda has put out a recall/buy back for the same issue on the Element and the CRV in Canada, where there are areas of high salt usage. Honda has done the same for the CRV in northern 'high salt use' states but not yet the Element. I first heard knocking in the rear about 6 months ago but have generally been ignoring it. After an inspection following an unrelated issue is when I was alerted that the knocking was due to this. These are the details for the Canada recall: Honda is recalling all 2003-2011 Element SUVs, warning of rusting rear frames that could result in the complete separation of the rear trailing arm. According to Transport Canada, this recall applies to vehicles originally sold, or currently registered in areas of heavy road salt usage. This includes, but is not limited to Ontario, Quebec, New Brunswick, Nova Scotia, Prince Edward Island and Newfoundland and Labrador. Signs of a worn rear trailing arm include difficulty to maintain a straight line, thudding noises coming from the rear and the appearance of the vehicle having been lifted. In a worst case scenario, the vehicle may lose control. Transport Canada elaborates that owners will be notified by mail to send their vehicle to dealers, who will inspect the vehicle for corrosion in the rear trailing arm front mount bolts. If passed, corrosion protection and support braces will be installed. If failed, Honda will offer to repurchase the vehicle. However, secondary inspections and body shop repairs are also possible. For more information on recall number 2021024, visit Transport Canada.

Drivers side rear trailing arm separated from chassis. This occurred while backing out of a parking spot causing the left rear wheel to turn outward. When this happened I had to turn the steering wheel left to keep vehicle going straight forward and this was at an idling speed. we had just a few days prior returned from an 1800 mile trip. Had this occurred at interstate speeds it most likely would have been catastrophic resulting in serious perhaps fatal consequences. The otherwise great vehicle is not repairable according to the diagnoses from my Honda dealer.