2024 Jeep Wrangler Complaint Log

Used 2024 Jeep Wrangler 4XE on 10/11/25 and stalled 8 times in 2 miles. had to come to complete stop put in park and restart . I circled back home and used my husbands car to run errand. I tried calling my Dealer and they were closed. My husband tried the Jeep the next day and engine light was on but jeep ran fine. I learned from a Jeep forum today that there was an update released on uconnect on Friday 10/10/25 and it affected lots of Jeep owners with the same symptoms . I did see the notification on Saturday and delayed it the 1st time and Jeep ran fine but the accepted it later and it happened after that. Thank God i was in my quiet neighborhood and returned the Jeep home safely that day. We will report this to our dealer on Monday when they open as this was scary and the engine light is still on.

Jeep is not running properly after a software update. Engine warning lights are coming on and message to pull over and restart. Unable to drive and keep a regular speed.

Pulled vehicle out of the garage. Stopped with foot on the brake. Let off the brake to drive and the check engine light came on along with a red light on the gauge cluster with a red wrench. Warning came on the screen saying put vehicle in park and press the start stop button. Vehicle turned back on and the screen said no hybrid power available. Drove down my driveway and complete loss of power. Screen again said put vehicle back in park and press start stop button. Again the vehicle started and I returned to my driveway and parked the vehicle. Check engine light remained on when vehicle was on.

Jeep pushed an OTA Software Upgrade on 10/10/2025. The following morning 10/11/2025, while operating the vehicle. The vehicle lost all propulsion and power steering. Check Engine Light Came on and a message “Shift to P to Start” message appeared on the console. Additionally, the traction control system, collision avoidance alarms appeared on the console. Fortunately I was able to navigate the vehicle to the shoulder of the road without getting hit. However, I fear had my newly permitted teenage driver been operating the vehicle the outcome would have been much worse.

Updated my jeep (per the prompt) on 10/11. Subsequently Lost power steering and power while driving. Had to turn off the car and restart it. Not safe to drive and unpredictable.

After applying an OTA (over the air) update from Jeep on 10/11/25 at approximately 1pm EST, the vehicle would drive for about 100 yards and then lose all power. Check engine light came on and a message saying to put in park. This happened when I pulled out of a parking lot and was lucky enough to have enough momentum to get to the side of the road. Restarted the Jeep, drove another 100 yards in the shoulder and it happened again. Was able to get into a parking lot and had to get the Jeep towed to the dealership. I am waiting to hear from the dealership as to the resolution. As of this writing (10/12/25 @ 5:30 pm EST, I have seen 100's of posts regarding the same issue from other Jeep owners and I have yet to see a formal notice from the manufacturer acknowledging the issue with an action plan. The complete lack of quality control from Jeep has put 1,000's of drivers in danger as the vehicle just shuts down without warning. I seriously hope no one is injured or killed due to the gross incompetence of this manufacturer.

After over the air update "uconnect box update" 10 October 2025 I was driving on local road 15 mph/h after 2 minuts i get notice on dash " Shift to park" Power train go off lost power i need to pull over put car i park shut off restart power was back i was able drive 400 feet same thing lost power Check engine light comes on after rebooting screen i was able drive 15 miles again lost engine power and power steering Every time i got same messege " Shift to Park "

Was driving on highway at speed of 60mph then the vehicle loss motive and drifted with no power. Check engine light came on and was able to move to the shoulder. I was able to restart the vehicle but would move for a min then loose power again. Didn't matter whether on electric, hybrid,or gas.

I did the telematics update from 10/10/25 on 10/11/2025 and I lost power and complete control while driving car just shut off told me to put it in park but I couldn’t shift to park check engine came on. I was able to restart the car and it happened two more times before I was able to get to safety and call for a tow. It seems to be a wide spread issue. That could have caused serious accidents.

My car updated and now keeps stalling and the error said to service the electronic stability control.

The newest update caused the car to turn off while driving the vehicle. Check engine light is still turned on and I can’t drive the vehicle in any of the 3 modes it has.

I was driving on the highway with my son and the jeep completely lost power at 65mph. The gas would not work and the dash was telling me to put the car in park and press the start button. I had to move to the right lane and coast to the side of the highway and restart the Jeep. This continued to happen 2 more times. This is very unsafe and I will not drive this car.

updated a new update OTA the vehicle on Friday Oct 09 Was driving the next day Saturday theb11th and the car stalled and the D on the shift was blinking and could not move the vehicle. I had to put in park and restart to continue I was stopped in the middle of the road and could have been hit from behind as someone was behind me. The check engine light also came one

I was stopped at a light the Jeep turned off, dash said put vehicle in Park, restart, then Drive. After I turned off the Jeep and restarted, the check engine light came on. No issues that day, but engine light was on. Day two-engine light still on after full charge. Opened gas cap and tightened. No change. I was driving on the freeway at 65mph, slowed down to take an exit ramp, the Jeep warning light came on, the Jeep shutoff, and the dash lights went off. Warning said but Jeep in Park, restart then Drive. This was very scary at that rate of speed. I continued driving slowly, got off the freeway and it happened again while driving 30mph on a two lane road. Same warning as before. It turned off, I coasted to the side, placed it in park, turned off and turned back on. I slowly made it home the last mile without incident. I called the dealer and made an appointment. I will not be driving this Jeep until it’s fixed. Too dangerous.

Driving car stopped said to put in Park, engine light comes on. Restart start driving put into park again .. whilst on freeway! Just stopped

Software update on 10/10/25. In afternoon. Accepted update over our home wifi. [XXX] left house at [XXX] to go to Gunnison to visit our kids. After I pulled out of the driveway the car shut off. I started it again and drove a block car shut off again. Switched to e-save and drove the car down to mailbox. As I pulled into mailbox center the car shut off again. I restarted noted the check engine light and drove home. Called Perkins motors in colorado springs. Got an appointment to bring the car in at 1pm. Drove straight to the dealers service. They asked if I did a software update, which I confirmed. They said other 4xe owners had experienced the same issue. The checked in the car and we ran into someone else with the exact same issue in the waiting room. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

My 2024 Jeep Rubicon 4xe has experienced three separate incidents of complete power loss following the October 10, 2025 Uconnect software update (version FCA-MY24.U33.43-PROD). In two cases, the failure occurred while crossing active intersections, where the vehicle abruptly lost acceleration, flashed gear indicators, and displayed a “Shift to Park and Press Brake + Start Button” message. The vehicle became unresponsive and required a lengthy restart. These incidents posed serious safety risks to myself, my young driver, and surrounding drivers. I’ve attempted resets and reviewed Jeeps online community, Jeep connect app, but no fix is available. Multiple owners are reporting identical failures online, suggesting a widespread and massive software fault. I urge NHTSA to investigate this issue and compel Jeep to issue a rollback or patch to restore safe operation immediately. I am also requesting NHTSA to legally require these vehicles to be disabled immediately until a robust fix is available to avert life threatening consequences. I cannot believe Jeep has not done this on their own!!!

The vehicle lost significant power while driving. I was only able to go 30mph, then a message told me to restart the vehicle with the brake pressed and start button. Then after it restarted I drove and it would only go 11 mph. Research online has indicated numerous jeep wrangler owners having this issue after applying an over the air update. The vehicle slowed down rapidly, this was very dangerous and put my family at risk. Since there was no brake lights indicated a slow down, vehicles behind me had to abruptly slow down. This could have cause an accident. The check engine light came on and has stayed on. This happened on 11 October 25, which is a Saturday, the dealerships closed by the time I was able to get address this issue due to family commitments. The dealerships are also not open on Sunday.

I was driving on the freeway when the vehicle randomly shut off and jolted me and my passengers. After turning the car off then back on the vehicle would drive fonafew miles and then repeat jolt and shut off. This seems to be linked to a software update that I did last night.

On 10/11/25 approximately 9pm my vehicle completed an OTA update initiated by the manufacturer. Upon completion of the update, I went for a drive. At approximately 30 mph, the vehicle suddenly shut off, shifted into neutral, and ceased to operate leaving me stranded in the middle of the road. The vehicle would not start, shift into neutral, or operate in any manner. Several warning instrument lights came on. After about 30 minutes, the vehicle started and continued to loose power several times before I could get it back home. We were lucky that we were not rear ended. There are hundreds of complaints on social media referring to the same situation for other Jeep 4xe vehicles after completing the OTA update. Stellantis has not issued any official statement regarding this. This is a situation that could result in serious injury or death to many as the vehicle suddenly loses all functionality with no warning. Check engine light is now on the dash.

A software update was installed overnight on 10/10/25 by the manufacturer. During this time the vehicle remained garaged. On 10/11/25 I attempted to drive the vehicle. It started fine but when I put it into “drive” and began pulling out of our garage, it only went about 15 feet before it came to an abrupt stop on its own and shut off. I restarted it and now the check engine light is on. Looking for answers, I went to the 4xe forum where I see a ton of messages from other Jeep customers having the same issue with this model year after this software update. I called the Jeep dealership where I purchased it last spring and was told they’ve had a bunch of calls today and I should not drive it and should have it towed to them on Monday so they can investigate the issue.

Immediately after installing a system update, car shut off/stalled while driving. Attempts to restart and continue driving only resulted in minimal forward progress. Very scary and very dangerous situation to have car just stop functioning while driving.

My 2024 Jeep Wrangler stopped in the road as my husband was driving. On the dash it said to shift to park. And push start. When he did it would not move. He had it in drive and was stuck in the road for about 2 minutes. We are so thankful that no one hit us as we were just over a hill.

After traveling a short distance, the vehicle will shut down, lose all power and require you to restart. At which time the process repeats, short distance of travel with sudden loss off all vehicle functions. There is some indication that this is due to a software issue pushed in an ota update.

After an over the air update, when driving the vehicle all of the sudden thought the car was parked and lost all power. After coming to an immediate uncontrolled stop, I was able to shift into park and then drive again however due to the issue and many others reporting I am not comfortable driving above 25 MPH.

Performed uconnext update last night and this morning car completely lost power on the highway. Power steering also did not work and unable to provide gas to car to accelerate. Dead stopped on highway. Dealership then tells me it is “safe to drive but will continue stalling out”

October 11, went to the grocery store and parked. Upon shutting off the vehicle, it asked to push an update. I said ok, plugged the charger into the charging station and went shopping. About an hour later I left the parking lot. Made it 200 yards and the vehicle shutoff and started to come to an abrupt stop. I was in a 40 mph zone, and the person behind laid on their horn and swerved. My vehicles check engine light came on, and it was still in drive with the dashboard displaying a flashing D. I put it in park, shut it off and put the flashers on. Once I restarted, CE light was still on, but it let me put it into drive and move. I made it another 200 yards and it did the same thing. Pulled over again and parked. This time, I selected e-save to run on fuel. It was driving a little strange to me, but I was able to make it home (4 miles) safely. I’ll be taking it into the shop as soon as I possibly can.

I installed an update last night and today the vehicle just shuts off on it own. Looks like jeep stellantis pushed an updated that they clearly did no testing on. P1e1d-00 is the code when I scan. I can no longer drive my jeep.

After accepting a prompted Uconnect over-the-air (OTA) software update, my 2024 Jeep Wrangler 4xe began experiencing complete loss of motive power while driving. The vehicle suddenly lost acceleration capability and had to be restarted multiple times. I took the vehicle to McPeek’s Chrysler Dodge Jeep Ram in Anaheim, CA, where technicians confirmed that multiple Wrangler 4xe vehicles had arrived the same day with the same failure following the same Uconnect update. The dealership performed a rollback to the previous software version, but the issue was not resolved. During the post-rollback road test, the technician confirmed that engine and propulsion issues persisted, and my service advisor advised that the vehicle was unsafe to drive. As a result, the Jeep was not released back to me and remains at the dealership pending further direction from Stellantis engineering. Diagnostic codes reported by other affected owners and visible in forums include U0293-00 (Lost communication with hybrid control module), U0010-00 (CAN bus communication failure), and P1E1D-00 (Hybrid control processor fault), which appear consistent with a communication breakdown between the Uconnect and hybrid powertrain systems. Jeep Customer Care has opened case #[XXX] for this incident and is coordinating with the dealer. This appears to be a safety-related defect, as the vehicle can unexpectedly lose power while in motion. Dealer: McPeek’s Chrysler Dodge Jeep Ram 1221 S Auto Center Dr, Anaheim, CA 92806 (714) 635-2340

Last night my Jeep Wrangler 4xe had a automated over the air software update come up on the screen. As normal i pressed update so the computers updated themselves. This morning I was approximately .5miles away from my house (first time driving since update), and I got multiple warning lights and errors on the dash. THE MOTOR THEN TURNED OFF WHILE THE VEHICLE WAS IN MOTION. I pulled over, I was able to get the vehicle restarted and turned around. I made it about 1000feet from my house when the car TURNED OFF COMPLETLEY AGAIN. This time it would not restart. Luckily I was able to coast onto a side street off of a busy main road. I had to have the vehicle towed to a dealer. I later learned that Jeep pushed this update out and this same thing happened to THOUSANDS of 2024 Jeep Wrangler 4xe. Myself, my wife and my infant son could have been killed due to Jeep's negligence and carelessness, there is no way that a software update should be pushed out without it being tested and vetted. Oh and the dealers have no solutions or loaners so I am already out $300 for a 3-day rental.

Had an update, and now the Jeep is flashing lights everywhere, there was a thud, and it won’t drive. If this happened while I was driving, it could have caused a big issue and accident.

After my UCONNECT software updated today 10/11/25 my car has not been driving right since. I can’t drive more than 20ft without it stopping flashing “shift to p” all my gears are lighting up i put the car into park with my foot on the break it flashes 3 different other issues then reverts back to my MPH, i am not able to shift it back into drive i have to then turn the car completely off then turn it back on shift it into drive. Happened on a major road with heavy traffic NOT SAFE. i managed to do a hard factory rest and drove it on E-SAVE which i was able to get the car to my house without having to pay $350 for towing. I’m praying it can get me to work on monday and this will be fixed by then because i cannot afford to miss work let alone pay for a rental due to JEEPS MISTAKE!! I pay a lot of money for this car which is a 2024 Jeep Wrangler Sahara 4xe with less than 20k miles never had any other issues with it until now. VERY DISAPPOINTED!

My car will abruptly lose all power will driving down the road and the dash directs you to put it in park and restart the vehicle. This requires coming to a complete stop in the middle of the roadway. This happened 10x in a 30 mile drive and at times at highway speeds. Forcing me to either stop in the middle of the freeway or hope i can get to the side of the road to pull off. This is extremely dangerous and from my early research this is happening to all 4xe wranglers after a failed update last night. Jeep is advising people to drive the car in gas mode (which it does not have) but all 3 hybrid modes have the same result. Someone is going to be seriously injured or killed because of this issue. Nobody should be driving these vehicles like this and i dont know what my 18 year old daughter would have done if she was driving on the highway. This emergency needs immediate attention not the response from Jeep that they will “look into it monday”

Following last nights software update, this morning while driving car alert beeped and dash read “shift to P to start” and engine light came on. I restarted and engine light on. Car seemed to be in electric and gas mode at the same time.

What a scary experience I had today. Backing out of a parking spot, my jeep jerked and the Drive signal started flashing. The engine light turned on. Thank goodness I did not hit anyone or anything. My jeep had an automatic uconnect update yesterday. The jeep had to be towed because I was told by my Jeep service dealership where I got it, that it was unsafe to drive. I was out of state and had to use several Ubers and rent a car to get back home.

After an Update, the Jeep died completely in the middle of the road with a bunch of errors on the dash and would not restart. After about 10 minutes, it restarted but died again shortly after. A third try a while later and it ran in manual transmission mode to where we could get it home. Check engine light is on and vehicle is still acting odd.

After installing the latest OTA update (U37.23-PROD), my Wrangler 4xe displayed “Service Hybrid System” and lost power while driving on the highway. The vehicle entered reduced-power mode, forcing me to continue using only the gas engine with limited acceleration. This is a safety issue. The problem started immediately after the OTA update. Diagnostic codes: U0594, P0A45, P1E1D. Please escalate this to Stellantis Technical Operations and confirm if a software reprogram (TSB 08-029-23) is available for my VIN. This situation created a serious safety concern while traveling 300 miles from home on a weekend with no Jeep dealers open.

After a software update, the car would drive a few miles and then shut down in the middle of driving. You would be required to stop the car, put it in park, and restart the car. The car check engine light comes on and is in a crawl mode, with little acceleration. This is a wide spread issue across all 2024 Jeep Wranglers 4xe

Diving when alert came on that said service charging system and vehicle was going to be disabled. With in seconds vehicle powered off. I was barely able to pull off and part of my vehicle was still stuck sticking out on a busy road. Vehicles check engine light came, battery light and a message about the charging system. Has to have the vehicle towed to the dealer. I was told this was the 4th jeep towed there today after yesterday’s update.

After a system software update the vehicle bricked. Driving and engine would stop. Check engine light appeared as well as other lights.

When driving on a main road, my engine suddenly lost power with no advance warning. I was forced to coast to side of the road in order to put it back in Park and restart the engine. This happened 7 times during a 10 mile drive. It continues to happen no matter the distance driven

Installed telematics box module update on 10/10/25. Now the Jeep is continuously saying to service the electronic assistance system and will lose complete power while driving and display the “shift to Park” and service engine light is on (lost power 3 times in less than a 2 mile distance).

Immediately following a Uconnect software update performed around 11:00 AM on October 11, 2025, my 2024 Jeep Wrangler Rubicon 4xe stalled multiple times while driving on the highway. The vehicle lost power and became inoperable, creating an extremely dangerous situation. I was transporting my child at the time. Trouble Code: P1E1D. Number of Stalls: 3 total (1 on highway, 2 shortly after). The dealer confirmed they had received around 12 other Wrangler 4xe vehicles towed in the same day for the same issue, and another nearby dealer reported over 15. I have since learned through online owner forums that many other 2024 Wrangler 4xe owners are experiencing identical failures after the same software update within the last 48 hours. Jeep/Stellantis has not issued any public statement or safety notice. This is a critical safety hazard affecting many vehicles and should be treated as a potential defect related to the most recent Uconnect update.

Sudden loss of power every 2-5 minutes after the latest over the air software update.

After a recent over-the-air (OTA) update, our Jeep Wrangler 4xe does not drive.

After downloading the latest UConnect update, I turned on my Jeep and started my drive. About 500 feet later all the dash lights came on, told me to shift into drive to drive (I was) and I lost all power and steering control. I turned the Jeep off and back on and I could drive. This time I made it 1/4 mile and it shut off again, same situation in the middle of an intersection making a left turn. I was nearly hit by other vehicles and had to rely on the downhill slope to roll into the closest parking lot. The software update is bricking all 4xe jeeps that download the software update. UConnect help said they didn’t have a solution and to call Jeep Customer Support. I called them and a man answered the phone and said “we can’t help, call back on Monday” and hung up. I called my dealership and they didn’t know what was wrong with it either. I now do not have a vehicle until Tuesday at the soonest due to the holiday and the weekend.

On October 11, 2025, in the morning, shortly after installing a software update recommended by Jeep via the vehicle's infotainment screen panel, I experienced a sudden and complete loss of vehicle power while driving on the road at approximately 45 mph. This failure prevented me from controlling the vehicle, as the steering wheel locked up, causing the vehicle to veer off the road and into a ditch. I was able to restart the vehicle, and it initially appeared to operate normally. However, the same issue recurred within 60 seconds of restarting the engine, with another sudden loss of power and steering control. This defect nearly resulted in a serious collision, posing a significant risk of bodily injury to myself and other motorists on the road. No injuries occurred, but the incident could have been catastrophic at highway speeds. I believe this may be related to a software or electrical defect in the vehicle, potentially linked to the recent update. I request that NHTSA investigate this as a potential safety recall issue, as similar complaints of power loss and steering failures after software updates have been reported in Jeep models. Please contact me for additional details or documentation.

Downloaded an update - vehicle shuts off - very dangerous

After a software update on 10/10/25, the Jeep Wrangler has become unreliable, with the hybrid powertrain failing while driving, leaving the driver and passengers in dangerous situations in traffic. This occurs at any speed and results in a total loss of the high voltage system, including motive force and power steering. This has happened in an intersection, while making an unprotected left turn, while in parking lots and other typical traffic situations.

There was an OTA update pushed to my Jeep last night. Since I had just bought the Jeep 6 days ago I thought it was needing to catch up on updates so I let it update. Now when I attempt to drive it the Jeep will randomly SHUT OFF while driving at any speed and prompt me to shift to Park and a check engine light comes on. When I coast to a stop and shift to park and push the button to start it again it comes back on with a CEL. It will continue to do this until I just park it and don’t drive it.