2024 Kia Telluride Air Bags & Restraints Problems

I am submitting this complaint to report multiple unresolved safety-related issues involving my 2024 Kia Telluride that have not been properly addressed by either the authorized dealership or Kia corporate. Issue #1: Front Bumper Sensor / Mounting Bracket Failure The front bumper sensor mounting bracket failed and detached without any impact, collision, or customer-caused damage. I did not strike anything, and there is no evidence of accident-related damage. This appears to be a manufacturing defect. This component is part of the vehicle’s front driver-assistance and safety sensor system. Because the bracket is damaged, I am concerned the sensor may be misaligned, inoperative, or providing inaccurate data, which presents a potential safety risk while driving. Issue #2: Unrepaired Safety Recall – Door Belt Molding I brought the vehicle to an authorized Kia dealership (Fred Beans Kia of Langhorne) to have recall work completed, including a recall involving the door belt molding. After the service visit, I received conflicting information indicating that I may need to bring the vehicle back in for the same recall, and to date I have not received confirmation that this recall repair was completed. This recall involves door belt molding trim that can delaminate and detach from the vehicle, creating a road hazard and increasing the risk of a crash to myself and other motorists. I am concerned that I may currently be operating a vehicle with an open and unresolved safety recall. Despite multiple attempts to obtain clarification and direction from both the dealership and Kia corporate customer care, I have received no clear confirmation of recall completion, no resolution of the sensor bracket failure, and no assurance that my vehicle is safe to operate. These unresolved issues raise serious concerns regarding: •The integrity and functionality of safety-related sensor systems •Proper execution and documentation of safety recall repairs •Manufacturer and dealer respons

brakes weren’t working when trying to stop. Loud noise, braking pedals vibrated, when pushing down to attempt to break the brakes got soft, the steering wheel started to shake. Emergency parking lights and ASB lights on the dashboard came on. The vehicle was towed to the dealership and was unable to find the problem. They did a brake fluid exchange. Video of my driveway was provided to the dealership from this incident. Gear corporation was also contacted letting them know of the safety concerns I had. Third row and front passenger seatbelts not buckling.

am the owner of a 2024 Kia Telluride, VIN [XXX] . This is the 2nd Telluride we have and total 3rd Kia we have. I am writing to formally report a design defect in the rear seatbelt system that poses a serious child passenger safety hazard. In the second row, where my child’s car seat is installed, the seatbelt buckle is positioned extremely low and close to the seat base. This placement makes it nearly impossible for a child to buckle themselves in and causes delays in securing them quickly. In emergency situations, this design could also prevent a child from unbuckling themselves promptly, creating a serious risk if rapid evacuation is needed. Both in everyday use and urgent scenarios, this flaw can lead to improper restraint or dangerous delays in ensuring a child’s safety. I called Kia Consumer Affairs on Tuesday August, 12th 2025 Case # [XXX] and was told there were no available solutions or suggestions. I am not satisfied with this response, as this is not a matter of convenience but of safety compliance and proper usability for child passengers. As a loyal Kia customer, I expected a resolution or at the very least a clear commitment to investigate this issue. I am requesting that Kia: Document this as an official safety complaint. Inform me if there are any existing Technical Service Bulletins, engineering reviews, or pending design changes related to this issue. Provide an explanation of how Kia intends to address this safety concern for current and future Telluride owners and particularly to me as I have a 2 year lease. I am also submitting this report to the National Highway Traffic Safety Administration (NHTSA) so it is on record for investigation. Photos and video of the defect can be provided upon request. Thank you for your prompt attention to this serious safety matter. Sincerely, INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

3rd sear Buckle RH - 3rd row Rear bench right side rear passenger seatbelt anchor/buckle assembly (Right of 3RD Position) is damaged when rear seat is in down-folded position and soft length of seat buckle has slipped back under rear back rest. Receiving buckle is being crushed when seat is in folded position - KIA dealer argues misuse by customer - but fault is with manufacturer as rear buckle can slip below elastic tether because there is no stable anchor length between fixing bolt and tether point. Result is that seat buckle coupling becomes crushed when seat is in folded position. Part Replaced with K 89843 S9510WK

The contact owns a 2024 Kia Telluride. The contact stated while driving at an undisclosed speed, the driver's side rear window independently fractured. The vehicle was taken to an independent mechanic; however, the cause for the failure was not yet determined. The window was replaced. The vehicle was repaired. The dealer was made aware of the failure. The manufacturer was made aware of the failure but provided no assistance. The failure mileage was approximately 8,400.

Incident 1: Seatbelt was fastened as I returned from picking a child up from school. As we turned into our driveway my seatbelt unlatched unexpectedly. In addition, none of the warnings sounded that typically notify you when someone has taken off their seatbelt prematurely. Incident 2: I was pulling onto a main road from a side road when my seatbelt unlatched. None of the safety warning sounds came on. In both situations there was nothing near my seatbelt that could have accidentally depressed the button (and if there had been there should have been a seatbelt warning). Both incidents occurred close to or as I was making a right turn at slow speed.

The bottom bolt that attaches the second row driver side seatbelt to the side of the car came loose and fell out when a passenger tried to buckle up.