2013 BMW X1

Coolant Pump Electrical Connector Recall #24V-608 Program Control Units (DME) Recall #20E-A01 I am following up because my dealer was unable to complete the DME recall, and the coolant pump recall still shows as incomplete in NHTSA. My vehicle was moved off-site without my consent. I received no updates or documentation, and the dealer was dismissive. My car’s condition has declined due to unresolved recalls. I have already spent over $2,000 replacing the coolant pump and now face a $5,000 repair quote and potential off-site garage fees. Description of the issue: Dealer failed to complete DME recall Coolant pump recall shows as incomplete Vehicle moved off-site without your consent Customer Relations unhelpful and rude Financial impacts ($2k coolant pump repair in December, $5k quote, off-site fees) Requests: 1. Confirm in writing which recalls are open and applicable to my VIN. 2. Properly complete the DME recall (#20E-A01) at no cost, including any module replacement. 3. Ensure NHTSA reporting for #24V-608 is accurate. 4. BMW must restore my vehicle to proper operational standards. 5. Reimburse reasonable costs caused by the dealer’s mishandling, including garage fees and prior repair costs. 6. Provide a case number and timeline for all actions.

The contact owns a 2013 BMW X1. The contact stated that while shifting into park(P) and turning off the vehicle, there was white smoke coming from under the hood and entering the cabin through the air vents. No warning light was illuminated. The vehicle was driven to the residence; however, the failure progressed. The vehicle was towed to a local dealer and remained for additional tests. BMW of Minnetonka (15802 Wayzata Blvd, Wayzata, MN 55391) and Walser Subaru St. Paul (740 Concord St S, South St Paul, MN 55075) were contacted; however, the parts were not available for the repair. The contact believed that the failure was possibly related to NHTSA Campaign: 24V608000 (Engine and Engine Cooling, Electrical System); however, the contact was not notified of the recall. The contact stated that upon further investigation, Metrowerks BMW (1300 American Blvd W, Bloomington, MN 55420); was contacted for parts availability. The manufacturer was not made aware of the failure. The failure mileage was approximately 82,000.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted. The vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2013 BMW X1. The contact received notification of the NHTSA Campaign to Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The dealer was contacted and confirmed that parts were not yet available. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2013 BMW X1. The contact received notification of the NHTSA Campaign to Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The sensor on the electric water pump failed and caused the water pump thermostat and alternator to stop working and the truck to catch on fire. I uploaded proof below that I reported there was a problem since approximately 2021 to a certified bmw dealership and everything else was fixed but that. And I paid for the extra video inspection every time the same year model everything has been recalled and my family was put in danger and nothing done???? I have several other invoices as well BMW told me to contact you all Just seems like no one cares about my family’s lives I have like 10 more invoices and the final repair invoices

The contact owns a 2013 BMW X1. The contact stated while driving at an undisclosed speed, the engine overheated with a message that the engine was overheating displayed. The vehicle was taken to the dealer but was not diagnosed or repaired. The manufacturer was made aware of the failure and referred the contact to the NHSTA Hotline for further assistance The approximate failure mileage was 93,288.

Recall Campaign No. 24V-608 Over time, this could lead to a short circuit and, in rare cases, a thermal event or a fire. It's been almost 3 months since the problem was reported and the manufacture still has not come up with the remedy. The manufacture needs to address this recall ASAP. It's a safety hazard!

The contact owns a 2013 BMW X1. The contact stated that while driving at an undisclosed speed, the contact observed smoke coming from the engine compartment. The vehicle returned to normal functionality, but the failure became a regular occurrence. No warning lights were illuminated. The vehicle was not taken to the dealer or an independent mechanic. The vehicle was not repaired. After investigating the failure, the contact related the failure to NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); the VIN was included, but parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue, confirmed that parts were not yet available, and advised the contact to discontinue driving the vehicle. The failure mileage was 164,000. VIN tool confirms parts not available.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical system); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

There needs to be a recall for water intrusion to the parking distance control system in at minimum the 2013 BMW X1. Our whole camera system and parking sensors went out, as soon as I searched the problem, there were numerous forums advising of the issue. When I opened up the area in the trunk, the entire area was filled with water. The parts within all need to be replaced. This should be covered by BMW since this is such a huge issue.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

In June of 2024 heavy smoke began to come from my BMW X1's engine as I drove and parked at traffic lights. On July 26, 2024 I took my vehicle to BMW of Montgomery, Alabama where they performed a diagnostic test and concluded that the vehicle had an "oil leak". On July 31, 2024 my vehicle was repaired (the oil pan and valve cover gasket) by Nalley BMW of Decatur, Georgia. On October 19, 2024 my vehicle received an oil change at Nalley BMW of Decatur, Georgia. On [XXX] my vehicle's engine began to smoke again. On October 29, 2024 I called Nalley BMW of Decatur and they scheduled for my vehicle to come in for a Diagnostic Scan and they stated the following repairs (replacements) needed to be done: Cylinder Head Assembly-plastic valve cover is cracked and leaking. Replace Oil filter Housing and cooler Gasket (showing signs of leak) after repair clean oil from engine. I was told by Eric Noj my Service Advisor at Nalley BMW of Decatur, Georgia that the oil was leaking onto the exhaust and the vehicle could catch a fire while driving. I was also told due to the manufacturer BMW making the majority of its engine parts out of plastic to be more eco friendly it's more susceptible to leaks even after having repaired the leak in August 2024.

The contact owns a 2013 BMW X1. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated while driving at various speeds, the engine overheated and the check engine warning light illuminated. The contact stated that the turbo and other unknown parts were previously replaced; however, the failure persisted. The vehicle was taken to a Meineke Car Care Center, where the contact was informed that the failure could be related to the water pump. The local dealer was contacted. The vehicle was not repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 196,000. VIN tool confirms parts not available.

While driving, oil light came on, engine light came on, car started shaking, smelled a rubbery smell, engine turned off. Would not restart, took vehicle in, timing chain. So now because this happened after class action suit we are not able to participate in said class action suit!! Just because ours ran longer, should not mean you were not responsible for this, knowing there was a problem!! So disappointed in BMW right now!!!!

While pulling up to a red light and after coming to a complete stop, I sensed the engine was revving. While pressing down on the brake, I checked the RPM gauge to see the engine was revving at around 7k rpm. I tried to immediately put the car in park and turn off the ignition, but in the time it took me to move my hand from the steering wheel to the shifter, the car violently lurched forward and crashed into a pickup truck in front of me. I shut off the car momentarily. Realizing I was blocking traffic on a heavily traveled highway, I risked turning the car back on. I did so and was able to move it to the median to await the arrival of the state police. Later, I had the vehicle towed to an auto repair shop out of fear of driving it again. It is currently in the shop.

Cam shaft broke during driving, lost acceleration on interstate causing issues merging to get to shoulder of road. Caused damage to motor resulting in oil loss, significant smoking from engine hindering visibility. Verified by BMW certified mechanic that this is the problem. Stated most likely caused by a known timing chain issue with Bmws using that motor. The only indication that appeared was when it happened, screen inside car stated "engine malfunction"