2001 Daewoo NUBIRA Complaint Log

TL*THE CONTACT OWNS A 2001 DAEWOO NUBIRA WAGON. THE CONTACT STATED THAT THE CHECK ENGINE LIGHT ILLUMINATED ON THE INSTRUMENT PANEL. THE VEHICLE WAS TAKEN TO A LOCAL REPAIR SHOP WHERE THE CONTACT WAS INFORMED THAT THE CAMSHAFT POSITION SENSOR NEEDED TO BE REPLACED. THE VEHICLE HAD NOT BEEN REPAIRED. THE FAILURE MILEAGE WAS 19,941.

THE DAEWOO NUBIRA 2001 SHOULD BE RECALLED TO REPLACE LOWER CONTROL ARMS WHICH ARE ATTACHED TO THE SUSPENSION. I FEEL THE CONTROL ARMS' INADEQUACIES ARE CATASTROPHES WAITING TO HAPPEN. THE CONTROL ARMS ARE FAULTY AND COULD CAUSE STEERING FAILURE. THIS IS A PART THAT IS REPLACED ON THIS CAR MODEL TOO OFTEN. WHAT HAPPENS IF SOMEONE DOES NOT HAVE $700 TO PAY FOR REPAIR? I ASK THIS BECAUSE WHEN I DRIVE THE DAEWOO IT IS INCREASING DIFFICULT TO HOLD IT ON THE ROAD DUE TO THE FRONT END RACK AND PINION STEERING JERKING LEFT AND RIGHT. I LIMIT MY DRIVING TO THE SUPERMARKET AND SMALL ERRANDS BECAUSE OF THIS PROBLEM, AND BECAUSE OF THIS DEFECT I DRIVE SLOWLY AND ON SMALL STREETS. GETTING ON THE HIGHWAY IS COMPLETELY OUT OF THE QUESTION. I WAS TOLD BY THE TECHNICIAN AT MOTOR CITY, ODESSA, TEXAS, 432-550-8721, THAT THE BALL JOINT MAY FALL FROM THE FRAME CAUSING LOSS OF CONTROL. I NEED REPLACEMENT OF THESE CRUCIAL PARTS. I CAN LIVE WITH PEELING PAINT, BARELY FUNCTIONING ELECTRIC WINDOWS, AND A NON FUNCTIONING AIR CONDITIONER, BUT I CANNOT LIVE WITH A STEERING PROBLEM THAT IS VEERING OUT OF CONTROL. I KNOW THAT DAEWOO IS NO LONGER IN BUSINESS - BUT GMC IS. I ALSO KNOW THAT THE RATIO OF DAEWOOS TO OTHER AUTOMOBILES ON THE ROAD IS LOW; HOWEVER, ANY FUNCTION OR PART ON A PRODUCT THAT MAY CAUSE EVEN ONE ACCIDENT DUE TO MECHANICAL FAILURE SHOULD BE TAKEN SERIOUSLY BY YOUR DEPARTMENT. AN ACCIDENT CAUSED BY A MALFUNCTIONING STEERING MECHANISM ON ANY AUTOMOBILE MAY LEAD TO SOMEONE'S DEATH. *TR

THE CHECK ENGINE LIGHT CAME ON AND WHEN DIAGNOSED IT WAS RELATED TO A DEFECT IN THE CAMSHAFT POSITION SENSOR. I CAME TO KNOW ABOUT A RECALL REGARDING MY VEHICLE MODEL ON THE CAMSHAFT SENSOR AND TOOK IT TO A DEALERSHIP FOR REPAIR. THE DEALERSHIP SAID THE CAR WAS NOT IN THE DATABASE AND REFUSED TO DO THE REPAIR. IN THE RECALL LETTER IT SAYS THAT WITH THIS CAMSHAFT DEFECT THERE IS A RISK OF ENGINE CATCHING FIRE. *TR

RECALL 04V357000 WAS ISSUED FOR CAM SHAFT POSITION. *BF THE CONSUMER HAD THE REPAIRS DONE TO THE VEHICLE IN APRIL 2004, THE RECALL LETTER THAT THE CONSUMER RECEICED WAS DATED SEP, 2004. *TC *JB

DEALERSHIP WAS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS. VIN WAS INCLUDED IN THE RECALL, BUT THE RECALL PART NUMBER WAS NOT INCLUDED, ALTHOUGH THE ENGINE LIGHT WAS ON. *AK

DEALERSHIP IS CHARGING THE CONSUMER TO PERFORM CAM SHAFT POSITION SENSOR RECALL 04V357000 REPAIRS. VIN NUMBER WAS INCLUDED IN THE RECALL BUT THE RECALL PART NUMBER WAS NOT INCLUDED, ALTHOUGH THE ENGINE LIGHT WAS ON. *AK

CONSUMER RECEIVED A RECALL NOTICE REGARDING THE BRAKE HOSE. THERE WAS NO DEALER AVAILABLE IN THE ARE TO PERFORM THE RECALL. *JB

CONSUMER RECEIVED RECALL NOTICE 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 0V4357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 02V257001 CONCERNING BRAKE HOSE. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 02V131000 CONCERNING BRAKE HOSE .NO DEALER WAS AVAILABLE TO DO REPAIRS. *AK

CONSUMER RECEIVED NHTSA RECALL 02V257000 ON THE FMVSS 106 CONCERNING BRAKE HOSES. HOWEVER, CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *AK

CONSUMER RECEIVED RECALL 02V257001 CONCERNING BRAKE HOSE. DEALER WAS NOT IN OPERATION. *AK

THE CONSUMER HAD TO PAY AN OUT OF POCKET EXPENSE FOR THE CAMSHAFT SENOR. NHTSA RECALL 04V357000. *JB

THE CONSUMER RECEIVED A RECALL NOTICE(02V257001) REGARDING THE BRAKE HOSE, HOWEVER THERE WAS NO DEALER AVAILABLE TO PERFORM THE RECALL. *JB

THE CAMSHAFT SENSOR RECALL, THE CONSUMER HAD TO PAY OUT OF POCKET. NHTSA RECALL 04V357000. *JB

THE CONSUMER WAS UNABLE TO HAVE THE BRAKE HOSE RECALL 02V257000 PERFORMED BECAUSE THE DEALERSHIP LISTED ON THE DAEWOO WEBSITE IN THEIR STATE WAS NOT LONGER LOCATED AT THE ADDRESS PROVIDED. *JB

CONSUMER RECEIVED NHTSA RECALL 04V357000 ON THE CAMSHAFT POSITION SENSOR. THE DEALER REFUSED TO HONOR THE RECALL BECAUSE THE CAMSHAFT MODEL NUMBER IS NOT DEFECTED EVEN THOUGH THE VIN FALL IN THE DEFECTED VEHICLES.

CONSUMER RECEIVED A RECALL NOTICE(0V4357000) CAMSHAFT POSITION SENSOR: DEALER WAS NOT IN OPERATION. *NM

02 V 131 001/FMVSS 201 AIR BAG DEPLOYMENT & 04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: CONSUMER RECEIVED BOTH OF THESE RECALL NOTICES AND WAS UNABLE TO LOCATE A AUTHORIZED SERVICE CENTER WITHIN HER AREA. *JB......CONSUMER CLAIMED HE DID NOT RECEIVE AIR BAG DEPLOYMENT RECALL, ONLY A BRAKE HOSE AND CMP RECALL.*AK

THE CONSUMER RECEIVED A RECALL FOR THE BRAKES ON THE DAEWOO. 02V257000. *JB

02 V 257 000/FMVSS 106-BRAKE HOSES AND 04 V 357 000/CAMSHAFT POSITION SENSOR/MIL: THE CONSUMER RECEIVED TWO RECALL NOTICES AND WAS UNABLE TO LOCATE A AUTHORIZED SERVICE CENTER IN HER AREA. *JB

THE CONSUMER RECEIVED THE CAMSHAFT SENOR AND THE BRAKE RECALLS. THE DEALER STATED THE VEHICLE WAS NOT INCLUDED PER THE DAEWOO COMPUTER. *JB *NM

CONSUMER RECEIVED RECALL 0V4357000 FOR CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

NHTSA RECALL 02V257000 ON THE FMVSS 106/BRAKE HOSES. CONSUMER IS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL. *NM

CONSUMER WAS REFUSED SERVICE ON THE VEHICLE FOR CAM SHAFT SENSOR. THE CHECK ENGINE LIGHT WAS ON. RECALL 04V357000.*AK

CAM SHAFT POSITION SENOR SENDING SENOR SIGNALS TO ENGINE. *BF THE CONSUMER WAS UNABLE TO LOCATE A DEALERSHIP IN THE AREA TO PERFORM THE RECALL. THE DEALERSHIP THE CONSUMER DID FIND WAS 2 1/2 HOUS AWAY FROM HOME AND THE CONSUMER DID NOT WANT TO TAKE THAT LONG TRIP AND SOMETHING HAPPENED TO THE CAR. *JB

CONSUMER RECEIVED NHTSA RECALL 02V257000 CONCERNING FMVSS 106 BRAKES HOSES. CONSUMER COULD NOT LOCATE A DEALER TO HONOR THE RECALL. *AK

THE FRONT CONTROL ARM IS DEFECTIVE, VEHICLE MAKES A LOUD NOISE WHEN SHUTTING OFF. CAM SHAFT SENSOR RECALL 04V357000. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. THE FOLLOWING DEALERSHIPS DIDN'T HAVE ANY MORE DAEWOO TECHNICIANS, ADDRESS: 5402 HIGH CROSSING BLVD. ADDISON , WI 53718, PHONE: 608-246-7800, AND BOUCHER DAEWOO OF MADISON EAST, ADDRESS: 5402 HIGH CROSSING BLVD, MADISON , WI 53718, PHONE: 608-246-7800. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION. *AK

DEALERSHIPS REFUSED TO HONOR CAM SHAFT POSITION SENSOR RECALL 04V357000 BECAUSE THEY WERE NO LONGER HONORING THIS MODEL WARRANTY WORK. THIS WAS THE SECOND DEALER CALLED.*AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE, THE PHONE PROVIDED IN THE RECALL LETTER WAS NOT WORKING. *AK

CONSUMER RECEIVED RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR FROM THE MANUFACTURER AND WENT TO THE DAEWOO DEALERSHIP WHERE THE VEHICLE WAS PURCHASED. THE SERVICE DEPARTMENT WANTED TO CHARGE CONSUMER $40.00 FOR A DIAGNOSTIC TEST JUST TO BE SURE THAT THE DEFECT WAS AS DESCRIBED IN THE RECALL NOTICE. CURRENTLY, DEALERSHIP WAS TELLING CONSUMER THAT PARTS WILL NOT BE AVAILABLE FOR 3 TO 4 WEEKS. *AK

CONSUMER RECEIVED A RECALL NOTICE(04V357000) FOR THE CAM POSITION SENSOR. DEALER WAS NOT IN OPERATION. *JB

THE CONSUMER RECEIVED, NHTSA RECALL CAMPAIGN LETTER #04V357000 REGARDING THE CAMSHAFT POSITION SENSOR. THE DEALERSHIP WERE FAR AWAY FROM THE CONSUMERS HOME. *JB *TC

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. THE ONLY DEALERSHIP IN THAT AREA INDICATED TO THE CONSUMER, SORRY WE DON'T DO BUSINESS WITH DAEWOO ANY MORE. ROBERTS DAEWOO. ADDRESS: 625 HWY 70 EAST, HICKORY, NC 28602 , PONE: 828-324-2700 . *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE IN THE AREA OF NORTH DAKOTA.*AK

THE CHECK ENGINE LIGHT WAS ON. THE RECALL LETTER STATED THE CAMSHAFT WAS DEFECTIVE. THE DEALER STATED THE ID NUMBER FOR THE PART DID NOT MATCH AND CHARGED THE CONSUMER FOR THE REPAIR. CAMSHAFT SENSOR 04V357000. *JB

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING THE CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WAS AVAILABLE. THE PHONE PROVIDED IN THE LETTER IWAS NOT WORKING. *AK

CONSUMER RECEIVED A RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENOR. DEALER WAS NOT IN OPERATION. *AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHIFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CONSUMER RECEIVED RECALL NOTICE 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. DEALER WAS NOT IN OPERATION.*AK

CHECK ENGINE LIGHT WAS ON. THERE WERE NO DEALERS TO MAKE THE REPAIRS ON THE CAMSHAFT RECALL 04V357000. *AK

CONSUMER RECEIVED NHTSA RECALL04V357000 REGARDING CRANK SHAFT POSITION SENSOR. NO DEALERSHIP WERE AVAILABLE. THE PHONE PROVIDED IN THE LETTER WAS NOT WORKING. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CRANK SHAFT POSITION SENSOR. COMPANY WAS OUT BUSINESS. NO DEALERSHIP WAS AVAILABLE. THE PHONE PROVIDED IN THE LETTER WAS NOT WORKING. *AK

CONSUMER RECEIVED NHTSA RECALL 04V357000 REGARDING CAM SHAFT POSITION SENSOR. CONSUMER WAS UNABLE TO LOCATE A DEALER TO HONOR THE RECALL.*AK

NHTSA RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. CONSUMER CANNOT LOCATE A DEALER IN THE AREA TO HONOR THE RECALL.*AK

RECALL 04V357000 CONCERNING CAM SHAFT POSITION SENSOR. NO AVAILABLE AUTHORIZED SERVICE CENTER IN AREA.*AK