2020 GMC Yukon XL Engine Problems

My family drove from [XXX] to [XXX]. Upon arrival check engine light came on, we proceeded to a local shop, by the time we arrive check engine light was flashing and engine was knocking and was clearly malfunctioning. Shop owner recommended we transport the vehicle back home as service shops in the area were experiencing high volume and parts shortages. We had vehicle towed to a local shop in [XXX]. The engine is giving diagnostic codes P0300, P050D, [XXX] with internal knocking and tapping. Vehicle has been kept current on all oil changes and has no external leaks. GMC wants at least $12,000 to replace the engine. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

Engine started with a rough idle, I attributed this to mileage. Check engine light did not come on until days before scheduling service. Per diagnostic from Chevrolet service department: Lifter roller damaged and camshaft damaged on lobe. need to replace camshaft and lifters. this has been diagnosed by Chevrolet dealer mechanics at Ferman Chevrolet North Tampa, in Tampa Florida. Check Engine Light came on 4 days before I took it for diagnostic. Chevrolet and GMC have issued a recall on 2021+ but this remains outside that recall. I'm quoted for an $11,343 repair on a vehicle that has gotten regular synthetic oil changes at the dealership since I bought it with approx 80k miles on it. Metal was not noticed in the prior oil changes, latest which was

The contact owns a 2020 GMC Yukon XL. The contact stated that while driving 70 MPH and attempting a lane change, the vehicle failed to accelerate as intended. The contact pulled over to the shoulder and restarted the vehicle, but the vehicle struggled to restart and failed to accelerate as needed. The vehicle was driven to the residence at a reduced speed. The contact referenced NHTSA Campaign Number: 25V274000 (ENGINE AND ENGINE COOLING); however, the VIN was not included in the recall repair. The vehicle was not repaired. The manufacturer was not notified of the failure. The failure mileage was 70,000.

The contact owns a 2020 GMC Yukon XL. The contact stated that while driving at 35 MPH, there was an abnormally loud ticking sound coming from the vehicle. The driver was able to pull over safely. There were no warning lights illuminated. The vehicle was towed to an independent mechanic who determined that the lifter was stuck in the bore, and there was a misfire in cylinder #7 due to a stuck camshaft. The local dealer was not contacted. The manufacturer was not notified of the failure. The failure mileage was approximately 113,997.

My 2020 GMC Yukon XL Denali 6.2L with 59,000 miles developed a ticking noise and slight power loss diagnosed by three different garages as a "collapsed lifter" on #4 cylinder. It's one of the AFM/DoD cylinders that shuts down to save fuel. $8,000 repair estimate, or $12,000 if the failed lifter damaged the camshaft. All three garages said "we see a lot of these." Internet forums are loaded with lifter problems on this engine: specifically AFM/DoD lifters. Safety is not affected. Noise/diagnosis reproduced by three independent garages. Has not been inspected by mfg, police, or insurance rep. No warning lamps or messages, no ODB2 "codes" found by garages. Seven months ago the water pump exploded on Interstate 70, putting us at serious risk. Now this lifter trouble at 59,000 miles. Both should have been covered by the 60,000 mile powertrain warranty, but I'm beyond the 5-year limit.

Complete engine failure while driving on I25 in New Mexico, lost all power was able to roll into a airport parking lot. If I had not been close to the off ramp it could have been catastrophic with the truck traffic on the Interstate. The vehicle has completed all of its normal maintenance on time, and as of January 30, 2026 had a complete review from GMC that everything was in great shape including the engine. There was never a warning light, a maintenance message or any other indication.

This concerns a 2020 GMC Yukon XL Denali motor (6.2L gas) 118,000 miles. Regular maintenance performed every 5 K miles and per request of original dealer. Beginning 2 weeks ago a new regular pinging developed and the vehicle was taken to the dealer (at which time new tires were installed routinely). No clear issues were found upon brief inspection/auscultation and advised to return if the sound was recurrent. The sound persisted on a fairly frequent though intermittent basis. A recording was made and another appt made for routine spark plug replacement. Upon return and repeat inspection it was discovered that oil filter was full of metal shavings and advised it was very likely necessary for a complete engine overhaul (with $18-20 K price tag). Checking online it was discovered that this GM motor had a 580,000 vehicle recall for 2021-2024 models. A new ODI study is being done for similar complaints for 2019-2021 year models (additional 280,000 vehicles). The 6.2L motors have been found to have a crankshaft/bearing issue leading to motor failure and even sudden loss of power often presenting with metal particulate matter being discovered. Awaiting resolution.

We have owned the car for five years. We bought it new in 2020. Now, the engine has completely failed. It has the same problems all the recalled GMC Yukon Denali XL 6.2L V8 engines have; lifters are not functioning, cam shaft is destroyed, rods are bent, oil is pooling and the aluminum engine has melted. The engine light suddenly went off and we didn’t have acceleration. The vehicle started “puttering” and didn’t drive well. No warning at all. This is a known issue with GMC (which I just found out about) and I find it absurd I have to pay $26,000 for a new engine which will most likely have the same problem. Luckily nothing happened, but if that happened on the highway with my wife and three young kids in the car it could have been a nightmare situation.

Knocking noise from engine-no check engine light initially. Next time it was started knocking was still present and the check engine light was on. Contacted Champion Chevrolet in LaGrange KY. Dealership diagnosed problem (Code P0308 - Cylinder 8 misfire). Compression test on Cylinder 8 failed. Removed valve cover and confirmed loud tick in the rocker shaft and worn camshaft lobes. Was told I would need a new engine and that repairing the existing engine was not cost effective. So, $22,722.14 later, i have a new engine in my 2020 GMC Yukon and have the original engine (core charge) in my shop in case it is needed for evaluation to help determine if the GM recall should be expanded to 2020 model year (and others not covered by the current recall).

Driving today and car started rattling and pouring transmission fluid on the way home today. Barely made it home.

Complete Engine Failure at 83,986 miles and no prior signs that it was defective. Had GM initially look at it and they refused to cover the repair and indicated that it was due to faulty lifters. Took it to an independent shop, they tore it all down and indicated the lifters had trays that were not tight, which allowed the lifters to eat away at the camshaft. Due to that, metal shavings got into the main engine bearings and that is what ultimately caused the engine failure. While questioning how a new engine would be any more reliable than the one that failed, I was told that all engine suppliers were aware of the sloppy lifter play and the needed cam changes and new parts were all maid to a tighter spec so that this would not happen in the future. GM is fully aware of this issue and fortunately for me it did not result in my engine failing on the highway like others have. I was left with a 14,969.74 repair bill on something that should have never happened. I talked with current GM master technicians, and they indicated to me to stay away from anything pre 2025 because all engines were made to the same spec and they don't know why a change was not made sooner.

[XXX] [XXX] Phone: [XXX] Email: [XXX] [Date] National Highway Traffic Safety Administration Office of Defects Investigation (ODI) 1200 New Jersey Avenue, SE Washington, D.C. 20590 Subject: Safety Complaint Regarding 2020 GMC Yukon XL Denali – Repeated Engine Failures (VIN: [XXX] ) To Whom It May Concern: I am writing to formally file a safety complaint regarding my 2020 GMC Yukon XL Denali (VIN: [XXX] ) which I purchased in 2021. This vehicle has experienced repeated and dangerous mechanical failures that raise significant safety concerns. •March 2024: The oil pump failed, resulting in immediate engine issues. Repairs were completed under warranty, but the check engine light remained on afterward. •April 2024: The vehicle broke down again. At that time, the cams and lifters were replaced in addition to other service, but the underlying issues were not resolved. •August 2025: The vehicle failed once again. After taking it in, the service department could not determine the cause. When they believed they had identified the issue and took it for a test drive, the vehicle broke down again and had to be towed back to the shop. At that point, I was informed that the vehicle now requires a complete motor replacement and a new fuel pump. Each of these failures has left me stranded and placed me and my family in unsafe situations on the road. Despite contacting the dealership (Joseph Cadillac of Dublin), General Motors, and the warranty company, none have taken responsibility to properly resolve the issues. I believe this represents a potential defect in the engine or related systems that could impact many other consumers. I respectfully request that the NHTSA investigate this matter to determine whether a broader safety recall or manufacturer action is warranted. Thank you for your attention to this matter and for helping ensure consumer safety. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)

The engine light came on and started making noise. We drove it to a mechanic shop, and they said the code stated camshaft and other component issues, but the engine ended up failing completely and was rebuilt. We initially checked for recalls and our VIN did not show any; however, we recently became aware that our engine (6.2L) might be part of the ongoing current problems associated with a recall. We are hoping that GMC will cover any remaining repairs and/or reimburse us for the thousands it has cost us.

The vehicle suddenly stopped working while driving with my family of 5 in the vehicle. There was no warning, messages or other symptoms of the problem prior to this. We had no idea there was anything wrong until it just stopped working. Then the engine light came on. Thankfully we were close to an exit and were able to pull off the road. We had it towed to a GMC dealer they found cylinder 7 intake lifter collapsed causing P0300 to set in ECM. Upon disassembly of bank one found lifter guide failed due to lifter collapse leading to camshaft lobe damage. The engine required replacement of camshaft and all lifters. The total cost of repairs was $10,115.72. When I reported this to GMC they said that our vehicle was not part of the current recall for engine failure because it was a 2020.

I was driving 75 MPH on the interstate passing a semi. The Yukon did not respond to pedal pressure so I used my blinker, moved to right lane and coasted into the grass area. The engine was completely off. As I changed lanes the low oil pressure light came on and the truck demanded that I shut the vehicle down immediately. I called for a tow truck and had to be towed 27 miles to my home area.

The contact owns a 2020 GMC Yukon XL. The contact stated that while driving at an undisclosed speed, the vehicle experienced a loss of automotive power, and an abnormal rattling sound was coming from under the hood. The contact stated that the message "Action Needed - Oil Pressure" was displayed on the screen. The vehicle was towed to a local dealer, where it was diagnosed with catastrophic engine failure due to metal shavings inside the engine. The vehicle was not repaired due to the cost. The manufacturer was made aware of the failure. The failure mileage was approximately 52,000.

Vehicle suddenly lost power without warning or engine light coming on. Vehicle was inspected and found that the transmission fluid pump failing caused low transmission pressure and replacement was required. 70k transmission fluid change was done per maintenance recommendations. Vehicle had 112k miles.

Engine failure had to replace the motor.

Lifters broke and destroyed the camshaft at 99,000 miles. Total repair cost $8,200.

The contact owns a 2020 GMC Yukon XL. The contact stated that while his wife was driving approximately 65 MPH, the transmission started to slip out gear and the vehicle was losing motive power. The contact's wife had not observed any warning lights. The contact’s wife drove the vehicle back to the residence and while attempting to place the vehicle in park(P), the vehicle failed to respond. The contact had the vehicle towed to an independent mechanic who diagnosed the vehicle and determined that the transmission needed to be replaced. The vehicle was repaired; however, the contact stated while driving approximately 65 MPH, the check engine warning light illuminated. The contact was able to drive the vehicle to the residence. The contact stated that while attempting to restart the vehicle, the vehicle was idling roughly with white smoke coming from the exhaust pipe. The contact drove the vehicle to a different independent mechanic who performed an engine pressure test and determined that the engine needed to be replaced. The vehicle was not repaired. The manufacturer was not informed of the failure. The failure mileage was approximately 102,000.