2014 Ram 2500 Suspension Problems

Death wobble at 45 and 74 mph. Driving on freeway and vehicle begins to shake violently: Has been a problem with other year models in the past after researching. Very dangerous on busy freeways.

WHILE DRIVING MY VEHICLE DOWN THE HIGHWAY I HAD A BUMP/POT HOLE AND STARTED GETTING WHAT IS DESCRIBED AS DEATH WOBBLE IN THE FRONT END. I HAVE HAD THE RECALL DONE ON SOME STEERING COMPONENTS. NOT SURE WHAT THEY WERE. THIS IS HAPPENED TO ME AT LEAST THREE TIMES IN THE LAST MONTH. I TOOK IT TO A REPAIR SHOP THEY LOOKED AT THE FRONT END/STEERING COMPONENTS AND SAYS THEY CANNOT FIND ANYTHING WRONG.

ALIGNMENT RECALL PERFORMED ON TIME, BUT DAMAGE DONE TO FRONT RIGHT TIRE FROM THE RECALL. ALIGNMENT COULDN'T BE DONE BY A SHOP AND TOOK IT TO A DEALER WHO RE-DID THE WORK AND CHARGED $2000. SEARCH INDICATES THAT CHRYSLER RAM COMPANY DID A TEMPORARY FIX IN THE RECALL WHICH CAUSED THE PROBLEM. I SHOULD GET A REFUND FOR THE WORK THEY HAD TO DO TO FIX THE ORIGINAL RECALL ($2000)*DT*DT*DT*JB CONSUMER STATED RECALL WAS CORRECTED ON TIME.*JB*DT*JB

STARTED UP MY TRUCK TO GO TO TOWN, ENGINE CAME ON ABOUT 5 MIN IN THE DRIVE SO I TOOK IT STRAIGHT TO O'REILLYS WHERE THEY DID THE SCAN AND THE COMPUTER SAID MISFIRE IN CYLINDER 3. SO WE CHANGED THE SPARK PLUGS AND TOOK IT BACK TO RESET THE LIGHT, STARTED IT BACK UP AND LIGHT CAME ON AGAIN WITH SAME EXPLANATION. SO WE PARKED THE VEHICLE UNTIL WE COULD FIND WHAT WAS GOING ON, TALKED TO A MECHANIC AND HE SAID PROBABLY THE CAM/LIFTER PROBLEM, HE LOOKED AT THE VEHICLE SEEN I HAD A DROPPED VALVE SEAT(VERY ODD FOR JUST STARTING UP A VEHICLE) SO WE CALLED DODGE AND THEY INSISTED THEY HAD TO DIAGNOSIS IT SO WE PAID A TOWING COMPANY TO HAUL IT TO THEM. DODGE CALLED ME BACK AND SAID DROPPED VALVE SEAT BUT ALSO CAM/LIFTERS NEED REPLACED. I DONT SEE HOW DODGE CAN JUST SAY IT'S ON YOU TO FIX WITH THIS MANY VEHICLE OWNERS ALL HAVING THE SAME PROBLEM. THIS IS EXPENSIVE FIXES BUT NOT ONLY THAT I HAVE A TRUCK WITH A LOAN PAYMENT THAT I CANNOT DRIVE TILL IT'S FIXED.

TL* THE CONTACT OWNS A 2014 RAM 2500 DIESEL. THE CONTACT DISCOVERED THAT THE FRONT PASSENGER SIDE SHOCK ABSORBER TOWER WAS NOT FULLY WELDED. THE FAILURE CAUSED THE ALIGNMENT TO SHIFT AND WEAR OUT BOTH PASSENGER SIDE TIRES PREMATURELY. THE WELD WAS DISCOVERED TO BE FRACTURED WHEN THE VEHICLE WAS TAKEN TO DESERT SUN ESPANOLA (517 N RIVERSIDE DR, SANTA CRUZ, NM 87567, (505) 747-8100). THE DEALER STATED THAT THERE WAS NO RECALL ON THE VEHICLE AND THEY COULD NOT TOUCH OR REPAIR THE VEHICLE DESPITE IT HAVING BUMPER TO BUMPER WARRANTY COVERAGE. THE VEHICLE WAS NOT REPAIRED. THE CONTACT STATED THAT HE WOULD REPAIR THE VEHICLE HIMSELF. THE MANUFACTURER STATED THAT THEY COULD NOT ASSIST AND REFERRED THE CONTACT TO NHTSA. THE FAILURE MILEAGE WAS 70,000. THE VIN WAS UNKNOWN.*DT*JB

THE CRUISE CONTROL ON THE VEHICLE DOEST WORK. IT SEEMS TO BE SOMETHING WRONG WITH THE SYSTEM, BECAUSE IT STARTS TO SOMEWHAT WORK WHEN I REBOOT THE SYSTEM TO FACTORY SETTINGS. AFTER A WHILE, THE SYSTEM JUST STOPS WORKING. I GUESS THAT THIS IS SOMETHING A LOT OF PEOPLE GO THROUGH, SINCE THERE'S TONS OF YOUTUBE VIDEOS ABOUT PEOPLE TRYING TO FIX IT.

ON 9-4-18 TOOK MY RAM 2500 IN TO THE CHRYSLER DEALERSHIP IN LOWELL, MICHIGAN FOR THE RECALL R46/NHTSA 15V-541. THEY INDICATED THEY DID NOT HAVE THE PARTS TO DO THE RECALL AND WOULD CALL WHEN THEY WERE AVAILABLE. I CHECKED WITH THE DEALERSHIP AGAIN ON 10-4-18 AND THEY SAID PARTS ARE STILL NOT AVAILABLE AND THEY DID NOT KNOW WHEN THEY WOULD BE AVAILABLE.

WELD FAILED HOLDING THE FRONT RIGHT SPRING TOWER BRACKET TO FRAME RAIL

THE VEHICLE SHAKES AT HIGHWAY SPEEDS . I JUST REPLACES ALL 4 TIRES .

THREE ACTIVE RECALLS ON VEHICLE THAT DEALER WILL NOT FIX DUE TO TRAVEL REQUIRED. VEHICLE IS IN REMOTE ALASKAN VILLAGE. DEALER WANTS US TO SHIP THE VEHICLE TO ANCHORAGE AT OUR COST. COST TO SHIP VEHICLE TO AND FROM VILLAGE WILL COST US OVER $6000. COST FOR DEALER TO FLY A MECHANIC TO VILLAGE IS ABOUT $600. RECALLS ARE: NHTSA RECALL NUMBER: 15V-459 RECALL DATE: SEPTEMBER 4, 2015 MANUFACTURER RECALL NUMBER: R36 NHTSA RECALL NUMBER: 15V-460 RECALL DATE: AUGUST 21, 2015 MANUFACTURER RECALL NUMBER: R23 NHTSA RECALL NUMBER: 15V-541 RECALL DATE: OCTOBER 2, 2015 MANUFACTURER RECALL NUMBER: R46 LOCAL DEALER IS: ANCHORAGE CHRYSLER DODGE 2601 E. 5TH AVENUE ANCHORAGE, AK 99501

TIRE PRESSURE MONITORING SYSTEM LIGHT KEEPS GOING OFF FOR THE RIGHT REAR WHEEL WILL KEEP SHOWING NO AIR PRESSURE. THIS IS A INTERMITTENT PROBLEM. IT HAS BEEN IN THE DEALERSHIP NOW CLOSE TO 10 DAYS IN THE LAST 7 MONTHS AND THE PROBLEM HAS BEEN GOING ON A YEAR NOW. IT STARTED HAPPENING AFTER A RECALL ONOT THE TRUCK WAS PERFORMED. THE BALL JOINTSO ON THE TRUCK WAS REPLACED ABOUT A YEAR AGO AND IN SEPTEMBER WHEN I TOOK IT TO THE DEALERSHIP FOR WORK IN TOLD THEM THEY WERE BAD AND CHECK IT OUT.AND NOTHING WAS DONE. IT IS AT THE DEALERSHIP AS I WRITE THIS AND I LET THEM KNOW THETHAT WERE BAD AGAIN THERE IS CLUNKING WHEN YOU JACK THE TRUCK UP AND PUSH ON THE TIRE. ALSO VIBRATION WHEN DRIVEN. BOTH OF THESE PROBLEMS ARE A SAFETY ISSUES. THESE PROBLEMS HAVE BEEN GOING ON FOR WAY TO LONG AND LIFE OF THE BALL JOINT SHOULD BE LONGER THEN 4-5 MONTHS.

OUR 2014 DODGE RAM 2500 WAS TURNED IN ON 8/10/16 TO OUR LOCAL DEALERSHIP FOR REPAIR WORK ON THE SAFETY RECALL R46. AFTER FINDING TWO CRACKS ON THE TRACK BAR BRACKETS AFTER INITIAL INSPECTION, OUR LOCAL DEALERSHIP DID NOT FOLLOW THE PROPER RECALL INSTRUCTIONS FOR REPAIR WORK BY FAILING TO DISPATCH CHRYSLER'S WELDING TEAM TO THEIR DEALERSHIP FIRST AND INSTEAD USED NON-CERTIFIED CHRYSLER WELDERS TO MAKE THE RECALL REPAIRS TO OUR VEHICLE INSTEAD. OUR LOCAL DEALERSHIP INITIALLY ASKED US TO SIGN A WAIVER RELEASING THEM OF ANY WRONG DOING IN ORDER TO GET OUR VEHICLE BACK SOONER (WE DECLINED). ONCE THE CHRYSLER WELDING TEAM WAS NOTIFIED AND BECOME INVOLVED WITH THE LOCAL DEALERSHIPS ERROR THEY DEEMED THE OTHER NON CHRYSLER CERTIFIED WELDERS WORK UNSATISFACTORY AND THEREFORE THEY WOULD NOT STAND BEHIND THE WORK THAT WAS HANDLED BY THE LOCAL DEALERSHIP. THE LOCAL DEALERSHIP ADMITTED TO THEIR ERROR AND AS A RESULT WERE TOLD TO START OVER AND REPLACE THE ENTIRE FRAME TO OUR VEHICLE AT THE LOCAL DEALERSHIPS EXPENSE BEFORE MOVING FORWARD. TO DATE, OUR VEHICLE HAS BEEN IN THEIR POSSESSION FOR OVER 70 DAYS AND OUTSIDE FROM THEM GIVING US TWO DIFFERENT LOANER VEHICLES AND THE COMPLETE RUN AROUND - WE STILL HAVE NOT RECEIVED ANY DOCUMENTATION, OFFICIAL PAPERWORK, OR DETAILS WITH EXPLANATION OF THE EXACT REPAIRS OR WORK THE DEALERSHIP/CORPORATE CHRYSLER HAS DONE OR SHOWING WHAT CHANGES HAVE BEEN MADE TO OUR VEHICLE DESPITE OUR REPEATED REQUESTS, NOR IF OUR VEHICLE WILL BE DEEMED SAFE AGAIN OR WHEN WE'D GET IT BACK. *TR

TL* THE CONTACT OWNS A 2014 RAM 2500. WHILE DRIVING UNDER 10 MPH AND TURNING RIGHT OR LEFT, THERE WAS A CLUNKING NOISE FROM THE FRONT SUSPENSION AND EXCESSIVE WEAR ON THE TIRES. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC WHERE IT WAS DIAGNOSED THAT THE UPPER AND LOWER BALL JOINTS NEEDED TO BE REPLACED TO PASS INSPECTION. THE VEHICLE WAS NOT REPAIRED BECAUSE THE DEALER STATED THAT THE BALL JOINTS WERE IN SPECIFICATION. THE MANUFACTURER WAS NOTIFIED OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 30,000.

I HAVE CONTACTED THE DALLAS DODGE DEALER ON 3 OCCASIONS TO HAVE THE R46/NHTSA 15V-541 SAFETY RECALL CORRECTED AND THEY CONTINUE TO STATE THEY HAVE NO ESTIMATION OF WHEN THEY WILL HAVE THE PARTS TO CORRECT THIS HAZARD. I USE MY TRUCK TO HAUL AN RV AND I AM CONCERNED THAT THIS PART COULD FAIL DURING TOWING. THIS ISSUE IS CAUSING ME TO NOT USE MY TRUCK FOR ITS INTENDED PURPOSE.

TL* THE CONTACT OWNS A 2014 RAM 2500. WHILE DRIVING 75 MPH AND MAKING A RIGHT TURN, THERE WAS A LOUD NOISE UNDER THE VEHICLE. THE CONTACT COASTED OVER TO THE SIDE OF THE ROAD AND NOTICED THAT THE FRONT BRACKET DETACHED FROM THE FRAME, WHICH PREVENTED THE TIRES FROM TURNING LEFT OR RIGHT. THE VEHICLE WAS TAKEN TO AN INDEPENDENT MECHANIC, BUT WAS NOT DIAGNOSED OR REPAIRED. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBERS: 15V541000 (STEERING), 15V4060000 (AIR BAGS, SEAT BELTS), AND 15V459000 (AIR BAGS). THE PARTS NEEDED FOR THE REPAIR WERE NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE APPROXIMATE FAILURE MILEAGE WAS 155,000. PARTS DISTRIBUTION DISCONNECT, VIN TOOLS CONFIRMS PARTS NOT AVAILABLE.

TL* THE CONTACT OWNS A 2014 RAM 2500. WHILE DRIVING AT VARIOUS SPEEDS, THE VEHICLE BEGAN TO WOBBLE. UPON FURTHER INSPECTION, THE FRONT DRIVER SIDE WHEEL LOOKED AS THOUGH IT WERE ABOUT TO DETACH FROM THE VEHICLE. THE VEHICLE WAS TOWED TO A DEALER WHERE IT WAS DIAGNOSED THAT THE BEARINGS AND HUB ASSEMBLIES FAILED AND NEEDED TO BE REPAIRED. THE VEHICLE WAS REPAIRED. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE. THE FAILURE MILEAGE WAS 36,000.

TL* THE CONTACT OWNS A 2014 RAM 2500. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 15V541000 (SUSPENSION). THE PART TO DO THE RECALL REPAIR WAS UNAVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOTIFIED OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

TRUCK BED SHAKES VIOLENTLY FROM SIDE TO SIDE AT SPEEDS GREATER THAN 60MPH. I'VE TAKEN VEHICLE TO DEALERSHIP AND THEY'RE SAYING IT'S WORKING AS DESIGNED. THE CAB SHAKES VIOLENTLY DUE TO THE BED SHACKING. I'VE SPENT MONEY GETTING ALIGNMENTS AND TIRE BALANCING OVER AND OVER AGAIN AND THE PROBLEM STILL PERSISTS. THERE'S NO REASON A TRUCK SHOULD BE SHAKING ON THE FREEWAY.

TL* THE CONTACT OWNS A 2014 DODGE RAM 2500. THE CONTACT STATED THAT THE SPRINGS WERE DEFECTIVE ON THE VEHICLE. THE REAR OF THE VEHICLE SWERVED FROM LEFT TO RIGHT WHILE DRIVING 45 MPH AND WITH THE TRUCK BED LOADED WITH LESS THAN THE MAXIMUM WEIGHT CAPACITY. THE VEHICLE WAS TAKEN TO THE DEALER, BUT THEY COULD NOT DUPLICATE THE FAILURE. THE DEALER STATED THAT THE TIRES MAY NEED TO BE REPLACED. THE MANUFACTURER WAS NOT CONTACTED. THE FAILURE MILEAGE WAS 11,000.

R46/ NHTSA 15V-541. RECALL ISSUED AUGUST 2015. THEY STILL DON'T HAVE REPAIR PARTS AVAILABLE!