NHTSA Owner Complaint Log
This page lists owner-reported complaints filed with NHTSA for the 2020 Subaru Ascent. Complaints are unverified consumer reports submitted to NHTSA and do not by themselves prove a defect or defect rate.
Data synced from NHTSA on May 4, 2026
My 2020 Subaru Ascent struggles to retain power when accelerating, especially from stopping and especially when the fuel is low. The vehicle stalls or loses some power when trying to accelerate. The check engine light is not on and there is no other indication that there is a problem with the vehicle. I have discussed it thoroughly with my mechanic and we both think it sounds like a fuel pump issue. He looked at the other Subaru recalls and thinks my vehicle should be included in the other Subaru fuel pump recall (NHTSA ID Number: 21V587000). Does my vehicle qualify for this fuel pump recall? Thank you.
I was driving and I got check engine light and all safety features disabled while I was in the freeway, luckily I was able to drive to nearby Subaru dealer for inspection and I found out that there was a recall on the engine for this vehicle and when I contacted the manufacturer they asked me to take it for diagnostics and I did that at a Subaru retailer, but the case manager told me that this recall is being completed for the previous owner of the vehicle and cannot help me with anything, which was never disclosed when I was buying the vehicle.
Water intrusion occurred inside the vehicle, resulting in extensive mold contamination throughout the interior, including the seats, front and rear carpets, and a child’s car seat. The source of the water intrusion has not been identified. The vehicle was taken to an authorized Subaru retailer, which confirmed in writing that water was present inside the vehicle and that mold was covering interior surfaces, including the child’s car seat. The only diagnostic test performed was a car wash to check for a sunroof leak, which did not replicate the issue. The retailer indicated that further diagnostic work would require significant interior disassembly and cleaning at the owner’s expense before the source of the leak can be determined. The manufacturer was contacted regarding this issue and declined assistance, citing “lack of required maintenance.” The specific maintenance and its relationship to the water intrusion have not been identified, and the source of the leak has not yet been diagnosed. The retailer also stated that technicians would not enter the vehicle due to the extent of the mold contamination. As a result, standard recall repairs have not been performed while the vehicle remains in this condition. A dealership technician also documented in a recorded inspection that water was present beneath the carpet, that the source of the leak could not be identified without further disassembly, and that the extent of mold contamination created an unsafe working environment. This condition creates a potential health and safety concern due to mold exposure inside the passenger cabin, particularly for a child occupant. In addition, excessive interior moisture has caused window fogging, which may impair visibility while driving. No warning lights or prior indicators were observed before the issue was discovered. The problem has been confirmed by a Subaru retailer. The vehicle remains available for inspection.
Vehicle: 2020 Subaru Ascent (Build Date: March 2020) Component: Power Train – Automatic Transmission – Hydraulic Pressure Sensor / Wiring Harness The vehicle developed a flashing "Transmission Service" warning and check engine light. It was inspected by a certified technician at Lithia Reno Subaru. Diagnostic scan identified multiple transmission-related codes including P0137, P0700, P2096, P1867, P0867, P2723, and P0841. The technician documented the root cause as: "Found pressure sensor leaking oil through all harnesses." According to the dealership diagnosis, the transmission hydraulic pressure sensor failed and allowed transmission fluid to migrate into the vehicle's electrical wiring harness system. Fluid traveled through the transmission harness and continued into the bulkhead and engine harnesses, contaminating multiple electrical systems. Due to the extent of contamination, the dealership determined that all three harnesses must be replaced. The repair estimate is approximately $8,933. Transmission fluid entering the wiring harness can disrupt communication between the transmission control system and other powertrain components. This electrical contamination can cause erratic transmission operation or sudden loss of propulsion while the vehicle is in motion, increasing crash risk. Subaru has issued recalls and service bulletins involving CVT transmission and hydraulic pressure sensor failures in earlier Ascent vehicles using the same drivetrain. My March 2020 vehicle appears to have experienced the same failure pattern. Despite the documented component failure and extensive wiring contamination, the manufacturer declined to fully cover the repair. I request that NHTSA review this failure mode to determine whether hydraulic pressure sensor seal failures allowing transmission fluid to migrate into wiring harness systems represent a broader defect affecting Subaru Ascent vehicles.
Car has 82,000 miles, has been maintained and requires an engine replacement due to 'Sludge'. Reading a lot of forums that indicate this is a common situation with this make and model and likely due to manufacturer's defects.
i purchased this vehicle from Northwest Chevrolet in McKenna, Wa on [XXX] and they did not disclose to me that there were open recalls prior to my purchase. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
Vehicle: 2020 Subaru Ascent Issue: Cold weather software glitch If you are operating an Ascent or possibly other Subarus with the CVT in temperatures below -20F be certain to have either a small wrench or the appropriate size socket to loosen the ground clamp on the battery ground cable with you so you can employ what I call the magic Windows fix wherin one completely de-powers the system and reboots it. With all the ridiculous interconnections, if the CVT temperature sensor thinks the tranny is too cold the cars operating system looses it mind and goes completely bonkers. Subaru obviously did no cold weather testing. We have had 2 failures in cold weather. It only happens at temperatures well below the-20F range. The first case happened last year while driving after being stopped for a couple of hours. Everything seemed normal and then suddenly several warning lights came on and all of the safety systems and the eyesight system shut down. The car ran and drove, but none of the associated systems would work. No traction control. No cruise control. Several other systems. The only solution was to disconnect the battery and get this rolling computer to reboot. This was a temporary fix as the condition repeated itself although the car was driveable but with none of the safety systems operational. This year we were out in cold weather, -25 to -32. We went to a place to have lunch and when I went to restart the car the app failed to do so. So I put on all my gear and went out to start it manually. It would not start and all the warning lights were on and the radiator fan was running full tilt at -25F with the car off. I tried twice to get it going by pulling the battery cable to get it to reboot. Evidently when this happens you must leave the battery disconnected long enough (about 5 minutes) for all the capacitors in the electronics to drain. Once restarted, the car drove normally but we did not shut it down for any reason for the rest of the day.
Car is making loud noises while going over uneven roads. Only have 64,000 miles on it and I need to replace the struts.
Replaced front multi plate transfer clutch at 96,987 miles.
Although the NHTSA form does not include a transmission category, this complaint concerns a critical transmission-related defect in my 2020 Subaru Ascent, which caused oil migration into the wiring harness and contamination of the Engine Control Module (ECM). This complaint concerns a critical transmission-related defect in my 2020 Subaru Ascent. The vehicle has been inoperable since June 2025 due to a failure of the transmission secondary pressure sensor. This failure caused oil to migrate into the wiring harness and ultimately contaminated the Engine Control Module (ECM), rendering the vehicle undrivable. Authorized Subaru dealership Huberger Subaru in Colorado Springs documented the following: - Replacement of the transmission secondary pressure sensor - Replacement of the engine wiring harness - Check engine light returned after repair - Confirmed oil contamination of the ECM Despite repeated repairs and part replacements, the vehicle remains out of service for over seven months, with no confirmed timeline for resolution. Subaru of America has not provided meaningful updates or a clear repair plan, and corporate representatives have failed to respond to emails and phone calls. The extended downtime and lack of repair constitute a safety concern, as the vehicle could fail while in use under certain conditions. Additionally, $400 was improperly withdrawn from my account in July 2025 for rental reimbursement during the warranty repair period and has not been refunded. I am seeking prompt resolution, including repair or replacement of the vehicle, reimbursement for the rental charge, and any appropriate actions from Subaru to address this safety-related defect.
The contact owns a 2020 Subaru Ascent. The contact stated that while depressing the accelerator pedal to make a turn, the vehicle hesitated to respond. There was no warning light illuminated. The vehicle was taken to the dealer, but was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 61,900.
The contact owns a 2020 Subaru Ascent. The contact stated that while driving at an undisclosed speed, there was an abnormal rumbling sound coming from the undercarriage while driving over bumps in the roadway. No warning light was illuminated. The vehicle was taken to an independent mechanic who diagnosed the vehicle and determined that the front struts had failed and needed to be replaced. The contact related the failure to TSB: 059024. The vehicle was not diagnosed. The manufacturer was not made aware of the failure. The failure mileage was unknown.
My 2020 Subaru Ascent experienced a sudden failure of critical safety systems due to CVT fluid leaking through the transmission pressure switch into multiple electrical components. This fluid leak damaged several wire harnesses and the Engine Control Module (ECM). The check engine light came on and all Eyesight safety features disabled. Subaru has confirmed this will cost over $9,400 to repair. This issue appears to be related to known Subaru Technical Service Bulletins, including TSB 16-103-16R and TSB 02-170-17R, and matches the description in NHTSA Campaign WUV-07. Subaru of America has refused to fully cover the repair, even though my car is well maintained, has only 54,000 miles, and is just 4 months outside the powertrain warranty. This is not normal wear—it’s a serious defect that causes electronic failure and disables safety systems while driving.
Unknown PCV valve failure caused catastrophic engine failure on interstate highway (70 mph speed limit). Luckily there was room to pull to the side and no one got hurt. This part was recalled in 2019 models due to possible loss of control from engine failure. Dealer tore down engine to determine cause for possible warranty coverage and found the PCV valve was the cause of engine failure. There were no warning lights or indications of any problems before this.
Ever since our car went in for re-programing CVT drive chain it progressively has been having a problem of something slipping in drive and in cruise control. feels like a loss of power and a feeling chatter from transmission. Now when you put it in drive it makes a jerking noise. the thing is that we never had this problem until it went in for this recall. it's been back twice and they claim they can't find any problem but continues to get worse. it happens every time we drive it . just returned a 700 mile trip and it's very annoying. Also we do have an extended warranty.
Extreme rattle/clunking driving over bumps especially on dirt roads. Seems to be many people are having this issue. I know of another co worker who has a 2020 ascent making the same noise. Apparently there is a strut issue
While driving the vehicle between 30 - 40 mph, the vehicle will intermittently studder. I have mentioned this issue multiple times to the dealership and they have attempted to fix the issue but the problem still continues. The issue is occurring more frequently and I’m concerned this may create additional engine/powertrain problems down the road.
The contact owns a 2020 Subaru Ascent. The contact stated that while operating the vehicle, the transmission malfunctioned, and the vehicle would not properly accelerate. The vehicle was taken to the local dealer who serviced the rear differential but later the failure reoccurred. The vehicle was taken back to the local dealer to be diagnosed, and it was determined that the transmission was faulty and needed to be replaced. The transmission was replaced. No further information was available. The manufacturer was notified of the failure, but no assistance was offered. The failure mileage was 106,100.
Lug nut studs fail frequently. Have replaced 3. An additional failure identified today during routine tire rotation. Safety issue as wheel can separate from vehicle while driving.
I can’t say what caused the huge crack in the sunroof bc there is no chips on the outside and no chips or breaking point on the inside. We went to get in the car and open up the sunroof and it has a huge crack that is a known issue if you look it up online. So far we haven’t been able to get it fixed bc of the amount of money it cost to have it replaced and it can’t be done by anymore but the dealer as safelight won’t touch sunroofs. It appears that a weak glass was installed and that’s unfortunate too bc they have no intention on fixing this for us.
The contact owns a 2020 Subaru Ascent. The contact stated that the vehicle was taken to the local dealer for routine service, where it was discovered that the cam carrier was leaking from the engine. While having an oil change, the mechanic informed the contact that there were no further leaks found. There were no warning lights illuminated. After driving and parking the vehicle, there was an abnormal odor of oil coming from the vehicle. The vehicle was taken to the local dealer, where it was diagnosed that an overhaul of the engine was needed. While driving, there was an abnormal oil-burning odor coming from the vehicle. The vehicle was taken to another local dealer, Adventure Subaru (2269 N Henbest Dr, Fayetteville, AR 72704), who confirmed there was no recall coverage for the failure. The manufacturer was contacted, but no assistance was provided. The failure mileage was approximately 120,000.
The contact owns a 2020 Subaru Ascent. The contact stated that while his wife was driving at 55 MPH, the vehicle stalled. No warning lights illuminated. The contact stated that the failure was related to NHTSA Campaign Number: 21V955000 (Power Train). The vehicle was towed to the local dealer where it was diagnosed that the transmission needed to be repaired. The manufacturer was notified of the failure, but no assistance was provided. The failure mileage was approximately 62,000.
Component- steering locks Safety risk - vehicle cannot be started. Therefore if in an area of risk - cannot start vehicle. This randomly happens pulling into parking spaces. It is repetitive. I’m older and alone, scary when it happens as you are stranded. And call to Subaru roadside only option was to tow the vehicle the vehicle to dealership. Online fix is to man handle the steering wheel and turn it in the direction of the tension. Pulling into a normal parking space should not create the tension necessary for the steering wheel to lock. I have been on Subaru ascent form us and this seems to be a common problem with this vehicle. Mine has been inspected for the last occurrence and was told battery issue. The other times there were no battery issues and dealerships cannot find issues. Warning light only lights up after steering wheel locks up and vehicle cannot be started. The safety risk for me is being stranded - and no way to prevent it or know when it might happen.
The emergency brake occasionally comes on for no apparent reason. It has happened multiple times before but, never while driving until today. The button appeared to be stuck when I went to disengage it as well which made no sense. There was nothing in the way for it to get stuck. Upon further research in the Subaru forums it appears ours is not the only one to have experienced this. This leads me to believe there may be an unknown issue.
Transmission failure, chugging while driving on the road then slowed down in middle of the intersection, won’t accelerate which is a unsafe situation. It says “check engine”, “break, “eyesight disabled”, “at oil temp” and “transmission”. The speed was stuck to 20mph and engine eas loud. Smelled like something was burning too
Bolt holding the driveshaft support bracket backed out causing driveshaft to come out. This is a known issue with the 2019 and 2022 Subaru Ascents and have active service advisories but Subaru of America does not recognize it for the 2020 models even know it is also happening in the 2020 vehicles. If the driveshaft would have came out at a high speed it could have caused a crash. Based on the research the bolts do not hold the torque from the factory due to a bolt manufacturing issue and slowly back out after time unknown to the driver. Subaru is not recognizing the problem, so they are not notifying the 2020 owners of the problem, instead they are offering a 50% payment on the repairs as a goodwill payment to offset the cost since it is not a warranty issue. I had had my car in for oil changes in the past and the dealership did not know to check for the tightness of the bolts as there were no service advisories. There should be a recall for this problem before someone dies in a crash caused by this problem.
There is a significant crack in the inside rear panel of my panoramic sunroof, and no apparent or visible point of impact. The crack is spreading and needs to be replaced or I fear the glass will shatter. There is no evidence of the crack on the exterior, only on the interior. Car is out of warranty but only has 23K miles and is 4 years old. Took the car to the dealership, and they wanted to charge $4000 to fix. Contacted Subaru of America and they refused to fix. Have been on many Ascent/Subaru forums online and it appears there are multiple complaints about these cracks.
Car has 49,700miles. Front drivers side makes terrible rattling noise when driving over any uneven pavement or bumps. Took it to the dealer to determine the issue. They said the entire strut assembly needs replacing. No warning lamps have ever come on related to this issue. I have no idea if the car is safe to drive. There is a national back order on the parts. The dealer wants $1344 to replace it. This is crazy to me. I've driven cars with LOTS more miles than this and have never needed a strut replaced.
A clunky noise coming from the front wheels whenever we encountered any sort of bump.
I have the Graco Turn2Me car seat installed rear facing on the driver's side of the middle row (captain's chairs) of my vehicle. The car seat is installed with the seat belt due to my daughter's weight (36 pounds, so we were not able to use the latch). The car seat has been adjusted to the appropriate recline based on the installation method and weight of my child. There is an appropriate amount of space between the back of the driver's seat and the car seat itself. The car seat was installed by a CPST, following all rules of installation as laid out by both my vehicle manual and the car seat installation guide (graco). The issue is that despite the perfect installation, over time (meaning a few trips), the base of the car seat becomes loose as the child gets in and out of the car seat. The car seat is then no longer securely installed in the car. This particular model rotates, so that the child can be easily loaded and harnessed into the car seat while facing outwards. While the seat is facing outwards, it also tips backwards, essentially lifting a majority of the base off of the base of the seat of the car. I have reinstalled this car seat several times following all guidelines, and despite an initially correct install, within a few trips the base becomes loose and the entire car seat is tilted. Based on a quick internet search, this is a very common problem with this make and model car seat, especially when installed using the seat belt, rear facing. I do not feel that it is at all safe for my child to be in this car seat and it should be recalled immediately by Graco. No parent should have to uninstall/reinstall a car seat in a car after a few trips because it is coming lose. Photos attached show how tilted the car seat has become in the car (despite initially being installed securely). For some reason I was unable to upload videos but can share those as well showing how loose the base has become despite a proper install.
When vehicle was 3.5-4 years old, the LED "halo" around the headlight assembly went out. This part is a fixed part of the assembly and unrepairable and requires the owner to replace the entire headlight assembly. An LED headlight should not be going out after only 3.5-4 years. I have noticed this is a common complaint on online forums for the Subaru Ascent. Normally, this would just be a cosmetic nuisance, but in states, such as Virginia where I live, that have annual vehicle safety inspections, the vehicle fails inspection if any part of the headlight does not work, regardless of its effect on the functioning of the actual headlight lamp to produce light when activated. Further, this is a dealer only part and repair and I was quoted $1,300 for an issue that has no effect on the headlight to illuminate the road and is cosmetic only. Subaru needs to address this faulty assembly.
Unknown
When driving, Ascent sudders while under normal highway conditions. Has had all 4 recalls completed but this specific event has been consistently present even after each recall was completed. Now that Ascent is out of powertrain period, Subaru of America acknowledged transmission finally needs complete replacement but only offering portion as a one time offer.
The battery died after two weeks of replacing it, later revealing the alternator failed. Parts are not available, Subaru kept them My safety was at risk because the lights on my dashboard Christmas Tree'd letting me know something was wrong. Within a couple of blocks I had no power steering and was dying on a busy street. The car was so dead that I couldn't even turn on my hazard lights. The car was jumped by Subaru, the tow truck driver left and the car died two blocks later. This time in the middle of the busy street. The vehicle was towed to Subaru who replaced the battery we bought two weeks earlier. We asked if they check the charging system and they said yes. The battery light was on before we left the lot. We made them keep the car so we wouldn't die in the middle of anymore busy streets. Days later they determined it was the alternator. The car had 26,000 miles on it. I don't know what Subaru did with the parts. They said they needed them as it was a warranty replacement. The battery light never came on before the car died. First the Eye Sight Disabled light came on then many lights on the dashboard flashed on. This happened a couple blocks prior to me losing power. I found the first place I could to get off the road. Two weeks prior when the battery died, the eyesight disabled light came on and the battery light. That time I got home and we replaced the battery. Therefore when the eyesight disabled light came on, I knew something was wrong but thought I had time to get out of the way. Then everything died. The worst part is that hazard lights didn't work.
Possible Transmission issue. The transmission was replaced in February by University Subaru in Columbia, Missouri. I have made a second appointment as the vehicle is still having the same issue shifting gears or going uphill. During a drive where there was a small incline of 10 degrees when the vehicle somewhat jumped or as if it skipped a beat. I had stopped in traffic and when the other cars started to move, I started to drive forward, and the car jumped. A gap in the acceleration. I am scheduled to take it in on the [XXX] of April. I will follow-up with you. INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6)
The contact owns a 2020 Subaru Ascent. The contact stated that while driving at an undisclosed speed, the Forward Collision Avoidance front camera became inoperable. The pre-collision, the braking control, and the Lane Departure warning lights were illuminated. The vehicle was taken to the dealer to be diagnosed; however, the cause of the failure was not yet determined. The vehicle was not repaired. The manufacturer was made aware of the failure. The failure mileage was approximately 19,737.
The driver's side headlamp assembly (one complete piece, LED lighting) has a thin strip at the top that is used for daytime running lights. These are automatically on when the vehicle is on and it's not yet dark. In early 2024, this driver's side thin strip daytime running lights stopped working entirely. I've learned that the entire headlamp assembly must be replaced, rather than being able to just change out the daytime running component or replace a light bulb like one used to be able to do. I've taken the vehicle in for an estimate, and the Nashville, TN Subaru dealership quoted me about $1700 to replace the headlamp assembly, with nearly $1,000 of that being for the light itself, and the rest being labor. The technician at the Subaru dealership was aware of this problem, with many others coming into the shop for the same thing, and he advised complaining directly to Subaru. There are aftermarket options for $200 but the labor is still excessive. From researching online about how to find the aftermarket options, I've learned from a quick google search, lots of posts on Reddit and Facebook, among other forums, of other vehicle owners of this year and the years surrounding it that it is a very frequently-occurring problem, related to it being too close to something in the engine- and others reported that this has happened multiple times to their same vehicle! I called Subaru of America to complain and ask for a Good Will replacement, but they said they would not be able to assist me as I was beyond 3 years/50k miles, and that I would have to go with the Subaru of America option. Please look into this and find that this is a common problem and the remedy should not be stuck to the consumer, with such an exorbitant bill. Subaru should address this known problem and a recall should be made so that we may have this corrected/those who have had to pay for it can be compensated. Thank you!
The driver front seat bottom frame has came loose and rocks back and forth when driving, especially during start and stops. It was serviced and the dealer stated the movement comes from the side rails of the seat and is referenced via bulletin 12-288-20 stating its a known issue and the frame has been redesigned for this issue. After research, this seems to occur with a number of Subaru models, but the defect has not been covered by Subaru. The movement causes concern if an accident were to occur and should be considered a manufactures defect with replacement being covered by Subaru.
On Friday evening, February 23, 2024 , I pulled onto my driveway and came to a complete stop before driving into the garage . I reached up and hit the garage door remote. When the door began to go up I took my foot off the brake. Instead of creeping up the driveway the car took off like a proverbial "bat out of hell" It was as if I had pushed the accelerator compltely down.to the floor board. The brakes had no effect. I smashed through the garage door,. The car jumped a six inch concrete step up, obliterated the garage cabinets and pushed the contents of the cabinets and garage wall into our family room.The car came to a rest just outside our family room. My son opened the door to the garage and yelled out to me "Are you okay" Because the engine was still racing he said "Get your foot off the accelerator' My reply was I DON'T HAVE MY FOOT N THE ACCELERATOR". I then tuned the ignition off and the ordeal was over.. It appears that the engine continued to recieve fuel irregardless of the position of the accelerator., the automatic braking system failed miserably and the the forward collision warning was malfunctioning. I am waiting for the insurance company to remove the car from the garage and do a structural assessment.. Because there may be serious structual damage I want the insurance company to remove the vehicle less the second floor collapses onto the garage. My son was on the couch just seconds before the wall "exploded". The couch was moved eight feet across the room. If a piece of debris came through the windsield I also might have been injured. The potential for serious injury to others in another set of ircumstances also scares me. The malfunction came without warning. The damages will be in the tens of thousands of dollars. I am blessed that no one was injured or killed.
The contact owns a 2020 Subaru Ascent. The contact stated while driving 30 MPH, the transmission was slipping, and there was a loud sound coming from the vehicle. The contact stated that the vehicle lost motive power while accelerating. The contact was unsure if any warning lights were illuminated. The contact pulled over and left the vehicle for several hours. Upon return to the vehicle, the contact stated that the vehicle drove normally. The vehicle was taken to the dealer and an unknown module was reprogrammed; however, the failure recurred several times. The vehicle was taken back to the dealer and a diagnostic test was performed; however, the dealer was unable to duplicate the failure. The vehicle was not repaired. The manufacturer was made aware of the failure and stated that if the failure could not be duplicated the vehicle could not be repaired. The approximate failure mileage was 25,000.
My car refused to start-pressed the ignition and it sputted, lots of lights went on and off and then the running lights came on and stayed on and ran the rest of the battery out. Had to charge it for hours to get it started again.
The vehicle hesitates like it doesn’t want to get up to speed, despite pressing the gas pedal to accelerate. The RPM needle bounces. Dealership has not been able to “replicate the hesitation I feel when accelerating.” They originally tried to say I didn’t tell them the problem was happening when it had time to warm up, which is a lie, I have all the scheduling notes made by the employee who set the appointment up. Dealership said it passes diagnostic testing despite my serious concerns as the owner driving it daily. No lights are lit up on the dashboard which is another reason why the dealership is saying everything is fine. It’s already had a firmware update in July and the dealership is very dismissive of my concerns. I made multiple calls before appointment telling them it’s happening more frequently around 20-30 minutes of drive time and to make sure I have them the full picture well enough in advance for them to make adequate time to look at my vehicle
I have encountered a series of persistent issues with the vehicle since its initial purchase, indicating fundamental deficiencies that warrant thorough consideration and resolution. Commencing with brake malfunctions at an exceptionally low mileage threshold, the recurrent necessity for brake replacements, despite being facilitated by the dealership on four separate occasions, underscores a notable deficiency in the vehicle's manufacturing or assembly process. Furthermore, the manufacturer's offer of $10,000 in exchange for signing a waiver relinquishing my right to file a claim is indicative of their acknowledgment of the vehicle's inherent flaws. Subsequent to this agreement, additional complications have arisen, including persistent window malfunctioning, electrical faults, exhaust system irregularities, and most notably, transmission failures, with repeated complaints culminating in a catastrophic breakdown witnessed by the dealership's service team. In light of these recurring issues, the manufacturer's proposition to repurchase the vehicle while crediting back the $10,000 initially offered and prorating mileage solely from the transmission repair fails to address the cumulative impact of the vehicle's deficiencies. It is inequitable to discount the mileage accrued during the earlier brake-related concerns, especially considering the ongoing nature of the vehicle's mechanical shortcomings. Arguably, the rescinding of the $10,000 offer necessitates a reevaluation of the waiver's validity, as its premise was contingent upon mitigating specific concerns, which have regrettably persisted. Moreover, the manufacturer's refusal to accommodate a reasonable request for mileage adjustment from the onset of the brake-related issues undermines the principles of fairness and consumer protection. Given the manufacturer's reluctance to engage in arbitration and their apparent disregard for addressing the comprehensive history of issues encountered.
For the past month, the engine revs up higher than normal at slow and highway speeds. It had the feeling of the engine skipping gears and staying at to high of an RPM even with the accelerator being eased off. Initially it was brought to Subaru service dealer in November and they could not replicate the issue. On 12/13/23, it began to constantly go into very high RPMS, much more frequently then it had been, and the check engine light came on as well as a warning light for the automatic transmission oil temperature light. We brought it into the dealer and the evaluated and said the transmission is failing and said it is not safe to drive. We were given a loaner and they are in the process of submitting paperwork for a new transmission under their powertrain warranty.
We purchased a used 2020 Subaru Accent from a dealership on 11/16/23. Twice since that date the car would not start due to the battery not having enough charge to start it. The dealership that we bought it from stated that prior to the sale date they had a new battery installed.
CVT jerks the vehicle and stutters when at certain rpms, making long car rides very uncomfortable. Feels like whiplash every so often. Very dangerous when trying to speed up to pass another vehicle because the vehicle doesn't respond and accelerate as it should. The dealer said its normal because of the CVT technology. They said they tried to reproduce it, but were only gone 5 minutes. The highway is 5 minutes away from dealership, one-way. I explained it happens after about 20 minutes of continously driving at speeds over 50 mph. The vehicle had only been inspected once for this issue. The dealer refuses to look at it again because they, "already explained it to [me]". There are no warnings or indicators prior to it happening.
Reporting a serious incident with my 2020 Subaru Ascent at 21k miles. On October 16th, a burning plastic smell and white smoke from the floorboard forced an immediate stop; I had to call the fire department for safety. The vehicle's battery has been replaced thrice, and the radio system frequently resets. Despite a Subaru recall fix in February meant to prevent such issues, the problem persists, raising major safety concerns. With 20+ years in electrical engineering, I've noted consistent electrical issues with this car. I urgently request NHTSA intervention for an immediate and thorough investigation, holding Subaru accountable for ensuring vehicle safety.
The contact owns a 2020 Subaru Ascent. The contact stated while driving 10 MPH, the accelerator pedal was depressed, and the vehicle had started jerking. The RPMs became elevated however, the vehicle failed to respond. There was no warning light illuminated. The vehicle had not been diagnosed or repaired by an independent mechanic or dealer. The manufacturer was made aware of the failure and confirmed that the VIN was not included in a recall. The failure mileage was approximately 42,000.
CVT transmission skips in high gear and shudders randomly while driving down the road. Randy Marion in Hickory NC is where we purchased and replaced the rear transfer clutch and insists the problem has been corrected. It is not. Our regular mechanic and Moderna Subaru of Boone NC both agree the transmission is bad. It has been sitting at the dealership for 2 months while all parties argue over who is responsible for repair. (Original selling dealership, Subaru of America, 3rd party warranty) meanwhile I have no car but am expected to make payments. There are no warning lights or indicatator lamps to show an issue which is even more scary. I do not feel safe driving the vehicle without repair as the stutter and slipping between gears can cause hesitation that could cause an accident or worse. We did not test drive the vehicle at high gear and that was our mistake, but I drove it on a trip 2 days after purchasing and it had transmission issues the entire time. Dropped back off at dealership Monday morning and have been dealing with headaches since then.
The car has a blue smoke from tail pipe * oil smell when turned on and last for 20 seconds