2016 BMW 3 Series

I have been waiting since October 2024 to get a remedy available to fix the recall on this vehicle. Dealership won’t even look at the car since the remedy is unavailable but this is a dangerous issue to have and know about without a fix anywhere in the foreseeable future.

Car started to have low coolant when i would replace it instantly and i took it to a shop and they told me it has a recall.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The local dealer was contacted, and it was confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

i have previously reported this issue, confirmation #11656013. However, after diagnostic with a Certified BMW Service Center, i wish to follow up and add additional details. My 2016 BMW 320 XI is experiencing an issue with the Turbo Oil Feed Line. This is a known issue, reported under SI B11 11 16 on the NHTSA.gov website. i have been told that my specific vehicle / VIN is not included as part of this coverage under the Extended Warranty. However, since my car, N20 Engine is experiencing this specific issue, i am requesting my car be considered to be effected and that it should be included in this extended warranty. i have attached a copy of the Diagnostic / Inspection of my vehicle, dated 4/29/2025

The contact owns a 2016 BMW 320I. The contact stated that while attempting to start the vehicle after the vehicle had not been driven for a while, there was blue smoke coming from the exhaust pipes. No warning light was illuminated. The vehicle was taken to a local service center, where it was diagnosed and determined that the engine oil feed line to the turbocharger was leaking. The local dealer was contacted; however, the vehicle was not yet repaired. Upon further investigation, the contact related the failure to BMW Warranty Extension: SI B11 11 16; however, the VIN was not included. The manufacturer was made aware of the failure. The failure mileage was approximately 100,000.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

While replacing the battery, the battery well was rusty. If allowed to continue I have no doubt the very heavy battery will fall through to the ground causing an accident and very hazardous materials will spill on the roadway (acids and lead from a ruptured battery).

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The dealer was made aware of the issue and confirmed that parts were not yet available. The manufacturer was made aware of the issue and confirmed that parts were not yet available. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2016 BMW 320I. The contact stated that while starting the vehicle, there was white smoke coming from the rear end of the vehicle. The contact found information regarding Technical Service Bulletin: SIB 11116 (Engine and Engine Cooling released in July 2017). The vehicle was taken to the dealer to be diagnosed. The dealer linked the failure to the Technical Service Bulletin; however, the vehicle was not covered under the TSB. The vehicle was not repaired. The manufacturer was informed of the failure. The manufacturer referred the contact to the NHTSA Hotline to report the failure. The failure mileage was 119,000.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available .

Received recall notice 5 months ago from BMW. Why is it taking so long for them to address this issue?

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (ENGINE AND ENGINE COOLING, ELECTRICAL SYSTEM); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated while driving at approximately 65 MPH, the vehicle started decelerating unintendedly, with the message “Engine Hot – Stop Driving” was displayed. The contact pulled over to the side of the highway and waited for an hour for the engine to cool down, before restarting the vehicle. The vehicle was taken to an independent mechanic to be diagnosed. There were no fault codes retrieved, and the contact was referred to the local dealer for assistance. The dealer diagnosed the vehicle but found no cause for the failure. The vehicle was not repaired. The contact linked the failure to the recall. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The approximate failure mileage was 133,000. VIN tool confirms parts not available.

A recall was issued by BMW in August 2024. As of today, April 14, 2025, there is still no remedy issued by BMW to repair this issue. BMW states that the issue with the Water Pump Electrical Connector can cause a short circuit and engine fire.

The contact owns a 2016 BMW 328I. The contact received notification of NHTSA Campaign Number: 24V608000 (Engine and Engine Cooling, Electrical System); however, the part to do the recall repair was not yet available. The contact stated that upon driving and coming to a stop, there was an abnormal burning odor coming from the vehicle, and there was smoke coming front the A/C vents. The contact stated that a passenger who was occupying the front passenger's side seat and became aware of the abnormal burning odor. There was no warning light illuminated. An unknown local dealer was contacted. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 115,000. VIN tool confirms parts not available.

Brake line bracket failed. It appears that the bracket is made out of plastic and is a common failure for BMWs. The failure causes the line to rattle against the lower body and eventually break. The bracket is in a place very difficult to access. BMW wants to charge 1000$ while the part cost in under 10$

The contact owns a 2016 BMW 328I. The contact stated that after parking and turning the vehicle off, moments later the front end of the vehicle was engulfed in flames. The fire department was called to the scene and extinguished the flames. During the incident, a bystander who attempted to extinguish the flames was treated by EMS at the scene for headaches and smoke inhalation. A fire report was taken at the scene and the vehicle was towed away. The cause of the failure was not determined. The manufacturer and local dealer were notified of the failure. The failure mileage was 180,000.

The clip holding the emergency brake line is made out of plastic and mine broke (which I found out is common with these cars). When this happens, it rubs on the driveshaft which can wear through and sever the emergency brake line. This is a very dangerous situation and easily be avoided if BMW used a metal part vs. the current, plastic flimsy one.