2007 Ford Fusion Brakes Problems

ABS and WRENCH icon are flashing on dashboard. Car making a terrible noise from underneath . I try to drive the car but it loses power and goes into LIMP mode. I have read many problems with the ABS control module valves sticking open due to the wrong type of brake fluid put in by manufacturer. My car is a 2007 ford fusion sel AWD with only 89,000 miles. I need a recall service appointment as quickly as possible because this is the only vehicle I own. The car is just sitting in my driveway. HELP!!!!!!!!!

The contact owns a 2007 Ford Fusion. The contact received notification of NHTSA Campaign Number: 21V158000 (Air Bags) and 19V904000 (Service Brakes, Hydraulic) however, the local dealer had failed to return the contact's call to schedule an appointment for the recall repair. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue and followed up with the dealer; however, the dealer failed to assist. The contact had not experienced a failure. VIN tool confirms parts not available.

The contact owns a 2007 Ford Fusion. The contact received notification of NHTSA Campaign Numbers: 19V904000 (Service Brakes, Hydraulic) and 21V158000 (Air Bags) however, the parts to do the recall repairs were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while driving at an undisclosed speed, the brake pedal went to the floorboard while depressed, and then the vehicle lost motive power with the brake fluid message displayed. Additionally, brake fluid leaked onto the engine and there was smoke coming from underneath the hood. The dealer was not made aware of the failure. The vehicle was not repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 200,000. VIN tool confirms parts not available.

The contact owns a 2007 Ford Fusion. The contact received notification of Customer Satisfaction Program Number: 21N11 (Service Brakes, Hydraulic). The contact stated that while starting the vehicle, the brake pedal went to the floorboard while depressed. The contact had to apply force to the brake pedal to stop the vehicle. The vehicle was taken to the dealer and diagnosed that new brake hoses needed to be replaced. The vehicle was not repaired. The manufacturer was made aware of the failure and a case was opened. The failure mileage was approximately 122,000.

The contact owns a 2007 Ford Fusion. The contact stated while driving 20 MPH, the brake pedal required extended travel time for the vehicle to come to a complete stop. The contact stated no warning lights were illuminated. The vehicle was towed to the local dealer to be diagnosed. The contact was informed that the DOT fluid and reservoir cap needed to be replaced. The vehicle was repaired and however, failure persisted. Upon investigation, the contact associated the failure with NHTSA Campaign Number: 19V904000 (SERVICE BRAKES, HYDRAULIC) however, the VIN was not included. The manufacturer was informed of the failure but provided no further assistance. The failure mileage was approximately 50,746.

In January of 2020 and again in October of 2020, I received recall notices regarding the recall of the Hydraulic Control Unit (HCU) per the 19S54 / 19V-904 recall notice. Once the part was available, I scheduled the work and brought my Fusion to DCH Ford of Eatontown 764. The dealership looked at the HCU and said it was not affected and not in need of replacement. Days later, I tried to drive my car and had no braking capability, save the emergency hand brake. The Fusion was towed to the dealer and it was determined that the HCU failed. It was months before an HCU was available, so the car sat with the dealer until August 2021. I have the repair records showing the part that was replaced is the 2C215 HCU Module, the exact part that is outlined in the recall notice. Ford will not consider the repair under the recall because the recall closed when the vehicle was inspected in April. Despite many emails and telephone calls, Ford is now not responding to any contact and will not consider the repair bill under the recall notification.

A RECALL INVOLVING BRAKES REMAINS UNRESOLVED BY MANUFACTURER FORD.

TL* THE CONTACT OWNS A 2007 FORD FUSION. THE CONTACT STATED THAT WHILE DRIVING 45 MPH, THE BRAKE PEDAL WAS APPLIED HOWEVER, FAILED TO RESPOND AND DEPRESSED TO THE FLOORBOARD. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V904000 (SERVICE BRAKES, HYDRAULIC) HOWEVER, THE PART TO DO THE RECALL REPAIR WAS UNAVAILABLE. KEN WILSON FORD (769 CHAMPION DR, CANTON, NC 28716, (877) 740-8559) WAS CONTACTED AND CONFIRMED THAT THE PART WAS NOT YET AVAILABLE. THE VEHICLE WAS NOT DIAGNOSED NOR REPAIRED. THE CONTACT STATED THAT THE MANUFACTURER HAD EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE FAILURE MILEAGE WAS 49,000. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

TL* THE CONTACT OWNS A 2007 FORD FUSION. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V904000 (SERVICE BRAKES, HYDRAULIC) HOWEVER, THE PART TO DO THE RECALL REPAIR WAS NOT YET AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER HAD EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. AN UNKNOWN DEALER WAS CONTACTED AND CONFIRMED THAT PARTS WERE NOT YET AVAILABLE. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

TL* THE CONTACT OWNS A 2007 FORD FUSION. THE CONTACT STATED THAT WHILE DRIVING THE VEHICLE, THE BRAKES MALFUNCTIONED CAUSING THE BRAKE PEDAL TO EXTEND TO THE FLOORBOARD. THERE WAS ALSO A BURNING ODOR COMING FROM THE REAR BRAKES. THE VEHICLE WAS TAKEN TO CHAPMAN FORD LOCATED AT 1100 EASTON RD, HORSHAM, PA 19044, WHO CONFIRMED THAT THE FAILURE WAS DUE TO THE FAILURE LISTED IN THE NHTSA CAMPAIGN NUMBER: 19V904000 (SERVICE BRAKES, HYDRAULIC). THE CONTACT WAS INFORMED THE ABS HYDRAULIC CONTROL UNITS WERE FAULTY AND NEEDED TO BE REPLACED. THE CONTACT WAS INFORMED THAT THE PART NEEDED TO REPAIR THE VEHICLE WAS NOT YET AVAILALBE. THE FAILURE MILEAGE WAS 145,000.

This vehicle was totaled in May 2020. I had numerous and constant brake issues with this car and had much of the brake system (brake pads, rotors, and calipers I believe) replaced within a year of the accident. The accident occurred when I tried to apply the brakes, causing me to hydroplane into an oncoming car. My concern is that this could be related to the ABS recall (NHTSA CAMPAIGN ID: 19V904000). Although my vehicle does not appear to be affected by the recall, it seems very similar to the brake issues I experienced.

TL* THE CONTACT OWNS A 2007 FORD FUSION. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V904000 (SERVICE BRAKES, HYDRAULIC) HOWEVER, THE PART TO DO THE RECALL REPAIR WAS NOT YET AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER HAD EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS MADE AWARE OF THE ISSUE AND REFERRED THE CONTACT TO A DEALER FOR THE REPAIR. THE CONTACT STATED THAT OCCASIONALLY WHILE DRIVING, THE BRAKE WOULD POP WHILE DEPRESSING THE BRAKE PEDAL. THE FAILURE MILEAGE WAS APPROXIMATELY 79,000. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.

TL* THE CONTACT OWNS A 2007 FORD FUSION. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V904000 (SERVICE BRAKES, HYDRAULIC) HOWEVER, THE PART TO DO THE REPAIR WAS NOT AVAILABLE. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE CONTACT CALLED STEVENS FORD LINCOLN (717 BRIDGEPORT AVE, MILFORD, CT 06460), AND WAS INFORMED THAT PARTS WERE NOT YET AVAILABLE. THE CONTACT STATED THAT WHILE DRIVING, THE BRAKE PEDAL WENT HALF-WAY TO THE FLOORBOARD TO STOP THE VEHICLE. THE MANUFACTURER WAS MADE AWARE OF THE FAILURE AND INFORMED THE CONTACT THAT PARTS WOULD BE AVAILABLE IN THE THIRD QUARTER. THE FAILURE MILEAGE WAS APPROXIMATELY 60,000. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.*DT*DT*DT*JB

I RECEIVED SAFETY RECALL NOTICE 19S54 / NHTSA RECALL 10V-904 IN JANUARY 2020 TELLING ME THERE IS A SAFETY ISSUE WITH THE BRAKING SYSTEM ON MY CAR. IT SAID I WOULD BE NOTIFIED WHEN PARTS WOULD BE AVAILABLE. I GOT ANOTHER NOTICE IN OCTOBER OF 2020 TELLING ME THE SAME THING, BUT HAVE STILL NOT HEARD BACK. IT HAS BEEN OVER A YEAR AND NO WORD FROM FORD. IF THIS IS A SAFETY ISSUE THEY ARE NOT TAKING IT VERY SERIOUSLY. IT CANNOT TAKE OVER A YEAR TO GET PARTS. I AM GIVING THIS CAR TO MY GRAND DAUGHTER BUT DO NOT WANT TO DO SO IF THERE IS A PROBLEM WITH THE BRAKES.

I NOTICED A WARNING ON MY DASH THE BRAKE SYSTEM (ABS). I THEN SEARCHED FOR ANY RECALLS REGARDING THE AREA, WHICH LED ME TO THE NHTSA WEBSITE. THE VEHICLE WAS IN MOTION UPON NOTICING THE TROUBLE.

TL* THE CONTACT OWNS A 2007 FORD FUSION. THE CONTACT RECEIVED NOTIFICATION OF NHTSA CAMPAIGN NUMBER: 19V904000 (SERVICE BRAKES, HYDRAULIC) HOWEVER, THE PART TO DO THE RECALL REPAIR WAS UNAVAILABLE. A DEALER WAS NOT CONTACTED. THE CONTACT STATED THAT THE MANUFACTURER EXCEEDED A REASONABLE AMOUNT OF TIME FOR THE RECALL REPAIR. THE MANUFACTURER WAS NOT MADE AWARE OF THE ISSUE. THE CONTACT HAD NOT EXPERIENCED A FAILURE. VIN TOOL CONFIRMS PARTS NOT AVAILABLE.*DT*JB

I'VE HAD CONSTANT BRAKE ISSUES SINCE I GOT THE VEHICLE. I STRONGLY BELIEVE THE RECENT FORD BRAKE RECALL IS MORE WIDESPREAD THAN IS CURRENTLY BELIEVED AS I HAVE THE EXACT ISSUES DESCRIBED IN THE RECALL BUT MY VEHICLE IS SUPPOSEDLY NOT AFFECTED. I FEAR FOR MY SAFETY AND THE SAFETY OF OTHER FORD OWNERS WHO MIGHT BE AFFECTED BY THIS SIGNIFICANT BRAKE ISSUE.

FORD HAS FAILED TO PROVIDE A TIMELY REPAIR FOR MY VEHICLE ON A POSTED RECALL. THEY HAVE TAKEN OVER A YEAR AND STILL CLAIM THEY DO NOT HAVE A REMEDY FOR THIS RECALL. IT IS NHTSA RECALL #19V904. MY BRAKES NEED TO BE PUSHED NEARLY ALL THE WAY TO THE FLOOR IN ORDER TO STOP. THIS OCCURS ANY TIME I BRAKE.

MANUFACTURER RECALL NUMBER19S54 NHTSA RECALL NUMBER19V904 THAT WAS INITIATED ON DECEMBER 18TH 2019 HAS STILL NOT BEEN RECTIFIED BY FORD. I HAVE NOT BEEN CONTACTED TO HAVE MY VEHICLE REPAIRED.

IN DECEMBER OF 2018 THE VEHICLE HIT A ROUGH SURFACE OF ROAD AS I WAS STOPPING NEAR AN INTERSECTION. THE BRAKE PEDAL IMMEDIATELY WENT TO THE FLOOR AND I WENT INTO THE INTERSECTION. THANKFULLY THERE WERE NO CARS PASSING THROUGH. JUST AFTER THE INCIDENT THE BRAKES FIRMED UP AND WORKED AS NORMAL. CAR WAS BROUGHT TO THE DEALERSHIP AND NO ISSUES WERE FOUND. I ASKED ABOUT TECHNICAL SERVICE BULLETINS AND WAS TOLD THERE WERE NONE. DEALERSHIP THOUGHT THE ISSUE WAS A BRIEF LOSS OF VACUUM IN THE BOOSTER. TOLD TO KEEP DRIVING THE VEHICLE, AND IF IT HAPPENS AGAIN THEY WILL REPLACE THE MASTER CYLINDER. NOW ON 10/9/19 IT HAS HAPPENED AGAIN. VEHICLE WENT OVER A BUMP AND THE BRAKES WENT TO THE FLOOR. LOOKING ONLINE, I QUICKLY FOUND A YOUTUBE VIDEO BACK IN 2014 WITH A FULL EXPLANATION ON HOW THE HCU IS MALFUNCTIONING ON SOME OF THESE CARS. AFTER THE ABS EVENT IS OVER, THE ABS VALVE IS STICKING AND NOT RECLOSING RESULTING IN THE SOFT PEDAL. YET NOT LONG AFTER, THE PEDAL FIRMS UP AND THE BRAKES WORK AS NORMAL. IT LOOKS LIKE THERE ARE QUITE A FEW PEOPLE EXPERIENCING THIS. PLEASE LOOK INTO AT LEAST HAVING A TSB PUT OUT. I WOULD HAVE REPLACED IT LAST DECEMBER IF I HAD KNOWN, AS THIS IS A DANGEROUS PROBLEM. MY DAUGHTER WAS DRIVING THIS TIME AND I'M JUST THANKFUL SHE WAS IN A SITUATION WHERE SHE HAD ENOUGH ROOM TO STOP. PLEASE, PLEASE ISSUE THE TSB NOW. THE CAR SHOULD BE RECALLED AS IT'S UNSAFE, BUT AT LEAST A TSB GIVES THE OWNER/DEALER THE INFORMATION NEEDED TO GET THE CAR FIXED. HAVE RECORD OF VISIT TO DEALERSHIP IN 2018 IF NEEDED. IT SHOWS THAT THEY WERE CONCERNED ABOUT THE HOSES TO THE BOOSTER. NOTHING ABOUT THE HYDRAULIC CONTROL UNIT.