2016 Ford Mustang Tires & Wheels Problems

My tire is a 255 / 40 ZR 19 model, speed rated 100W. While rotating my tires I noticed catastrophic tread separation on the inner sidewall of the tire. The separation is scattered, not all in one section, and in total covers about 1/4 of the total diameter. The underlying belt package has separated and steel wire is plainly visible at distance. The tire was still holding normal pressure at the time of discovery and there was no indication of the separation from any pressure devices or anything other than visual identification of the issue, which was only possible due to a routine tire rotation. Driving conditions since installation of the tire have been ~85% dry weather at speeds no greater than 85mph. A long haul trip from San Jose, CA to Los Angles, CA (~675 miles round trip) occurred 1.5 weeks prior to discovery.

I took my 2016 Ford Mustang to a local Discount Tire store to replace my front passenger seat tire. A few minutes after my car was pulled into the work Bay I was called to the front desk. The store supervisor advised me at that time that his technicians noted that my Lug nuts were swelling and would soon either burst causing my tire to potentially become dislodged or at the very least many garages would not be able to remove the lug nuts and ultimately the tire. He added that this was a common and known issue of Ford and there was even a potential class action suit regarding the issue. Of course the Supervisor's "fix" was to sell me a kit of replacement lug nuts which i Purchased at the cost of $95 dollars. I feel this is very dangerous and Ford should be responsible to reimburse me for the cost to replace inferior parts.

During routine service my mechanic repoted “3x lugnuts swollen past 22mm”

I recently took my vehicle to the local Ford dealer to get the oil changed and tires rotated. The service technician told me that they could not do the tire rotation without replacing my lug nuts at a cost of $100 because the lug nuts were swollen. I told her I wasn't interested thinking this was some type of bogus sales ploy. I mean how can lug nuts swell? She then threatened, " well you know if you have a flat you'll be stuck on the side of the road unable to change the tire!" This made me angry because I thought it was a bunch of baloney. When I got home I actually removed the lug wrench from my trunk and tried to remove the lug nuts only to find that she was telling the truth. I could not get the lug wrench on the nuts without driving it on with a hammer. Then the nut was stuck in the wrench which had to be clamped in a vise and the nut driven out with a punch. This is how I replaced all my lug nuts. I bought a set from Advance Auto Parts for $41. However, I still have to question why this problem which can leave people stranded on the side of the road and which the Ford dealerships are obviously aware of has not resulted in a recall?

My 2016 Mustang GT has swollen lug nuts which must be replaced . This is a safety issue. Please advise as to whether tyhe company intends to correct this failure.

Lug nuts on car have swollen up and tire repair shop said they need to be replaced because if we are to get a flat we wont be able to change tire.

I stopped by Belle Tire, 11361 E Washington St, Indianapolis, IN 46229 to get my right rear tire leak repaired on my 2016 Mustang, and they informed me after struggling to remove the OEM lug nuts, that there have been several complaints and lawsuits with these type of lug nuts, due to the fact that the cap on these nuts swell or become distorted, which makes it impossible to remove with standard lug nut wrench. They recommended that I replace all lug nuts with the solid, one piece type nut, part number Dorman lug nut 611-007 @ $11 each, for a total of $235.40. I feel after many complaints with these OEM lug nuts, ford should be required to replace at no cost to the customer, or reimburse customers who have already replaced for safety reasons.

GOODYEAR EAGLE F1 ASYMMETRIC ALL SEASON TIRE BLEW OUT WHILE DRIVING DOWN WINCHESTER ROAD IN TEMECULA, CA AT 45 MPH AROUND 6:45PM. THERE WAS A LOUD POP, FOLLOWED BY THE TPS WARNING THAT THE REAR PASSENGER TIRE HAD 1 PSI OF AIR LEFT. THE CAR WAS BROUGHT TO A STOP ON THE SIDE OF THE ROAD IMMEDIATELY. AFTER BEING TOWED FROM THE SIDE OF THE ROAD AND IT WAS DISCOVERED UPON INSPECTION THAT THE INNER SIDE WALL HAD FAILED.

THE VEHICLE HAS APPROXIMATELY 1000 MILES ON THE ODOMETER. IN AN EFFORT TO RECTIFY SQUEALING BRAKES, I CHECKED EACH LUG NUT TO ENSURE THEY WERE TIGHTENED TO FACTORY SPECIFICATION. ALL TWENTY (4 WHEELS WITH 5 LUG NUTS EACH) WERE ONLY TIGHTENED TO APPROXIMATELY 90FT-LBS OF TORQUE. FORD SPECIFIES IN THE OWNERS MANUAL THAT LUG NUTS BE TORQUED TO 150FT-LBS. I USED TWO DIFFERENT STYLES OF TORQUE WRENCH TO CONDUCT MY TEST. ONE TYPE WAS USED TO LOOSEN TEN LUG NUTS AND ANOTHER WAS USED TO LOOSEN THE REMAINING TEN. MY INTENT WAS TO RULE OUT ANY GROSS ERROR IN TORQUE READINGS. TO MY KNOWLEDGE THE WHEELS HAVE NEVER BEEN REMOVED FROM THE VEHICLE, THEREFORE I SEE THREE POSSIBILITIES: THE DEALER REMOVED THE WHEELS FOR SOME REASON AND DID NOT TORQUE TO SPECIFICATION OR THE LUG NUTS ARE LOOSENING THEMSELVES EVENLY OR THEY WERE NOT TORQUED TO SPECIFICATION FROM THE FACTORY. I FEEL THE MOST LIKELY SCENARIO IS THAT THEY WERE NOT TORQUED TO SPECIFICATION FROM THE FACTORY.