1995 Ford F-250 Suspension Problems

DT: THE CONTACT STATED THE BOLTS RETAINING A BRACKET FOR THE FRONT END FAILED, AND THE FRONT AXLE WAS ALLOWED TO MOVE AROUND. THE CONTACT WENT TO THE DEALERSHIP AND ORDERED THE PARTS TO FIX THE VEHICLE BY HIMSELF. HE HAD NOT SPOKEN TO ANYONE A T FORD ABOUT THE DEFECT. HE STILL HAS THE DEFECTIVE PARTS. THE BOLT HELD ON THE DRIVER'S SIDE DIFFERENTIAL FRAME. *AK

AXLE PROBLEMS WITH TRAVEL TRAILER. AMOUNT OF CARRYING AXLES UNDER THESE VEHICLES , NOT SUFFICIENT IN SIZE OR STRENGTH TO TAKE THE LOAD OR ROAD PUNISHMENT WITHOUT FAILING. *BF THE CONSUMER NOTICED THAT THE VEHICLE DID NOT PULL PROPERLY. THERE WAS A SIDE TO SIDE PULL AS IT WENT DOWN A DOWN GRADE AND WOULD WANDER AS IT PULLED DOWN THE ROAD. THIS PROBLEM EVENTUALLY INCREASED TO A VIOLENT WHIP. UPON INSPECTION, IT WAS NOTICED THAT THERE WAS A LOT OF UNEVEN TIRE WEAR DUE TO AXLE MISALIGNMENT. THE AXLES WERE FOUND TO SUPPORT 8285 POUNDS. (KOMFORT 2000 25 TS TRAVEL TRAILER/VIN [XXX]) *SC INFORMATION REDACTED PURSUANT TO THE FREEDOM OF INFORMATION ACT (FOIA), 5 U.S.C. 552(B)(6). *TR

WHENEVER THE WHEELS ARE TURNED, THE RIVETS WOULD COME LOOSE & MAKE LOUD NOISES. TOOK VEHICLE TO DEALER & THE MECHANIC. THIS PROBLEM HAD HAPPENED BEFORE. WAS NOT CHECKED THE FIRST TIME. *AK

FRONT LEFT SPRING IS RATTLING, AND THERE IS SOME TYPE OF KNOCKING NOISE. DEALER CAN'T DETERMINE THE CAUSE OF THE PROBLEM. *AK

SUSPENSION FRAME BOLTS AND NUTS HAD TO BE REPLACED OR TIGHTENED. HAD HEARD NOISES & TOOK VEHICLE TO DEALER FOR REPAIRS. *AK

WHILE DRIVING ON UNEVEN PAVEMENTS THE VEHICLE VIBRATED VIOLENTLY. THE DEALER SAID THAT A SCREW ON THE SIDE OF THE TWIN I-BEAM CAME LOOSE. THE DEALER HAS REPLACED IT. *AK

VEHICLE'S FRONT SUSPENSION FRAME BRACKET THAT ATTACHES TO THE AXLE BROKE OFF ON RIGHT WHEEL BRACKET. *AK

WHILE DRIVING ACROSS RAILROAD TRACKS, FRONT END OF VEHICLE VIBRATED AS IF HIT AD TIRE A BLOWOUT, ACCORDING TO DEALER, THREE BOLTS WERE MISSING, REMAINING BOLT LOOSE, DEALER REPLACED ALL BOLTS. *AK

CONSUMER WAS PULLING A 5TH WHEEL TRAILER WHEN THE BAR ATTACHING THE FRAME BOLTS OF RIGHT FRONT WHEEL CAME LOOSE BECAUSE ALL FOUR BOLTS HOLDING I-BEAM TO FRAME CAME OFF. WHEN PULLING INTO A PARKING SPACE, THE TOP OF THE WHEEL WAS INWARD AND THE BOTTOM WAS OUTWARD, DEALER REPLACED THE BOLTS. *AK

FRONT AXLE MOUNTING BOLTS LOOSEN, CAUSING PROBLEMS WITH STABILITY/HANDLING. (SIXTH VEHICLE ON 501504, 601386, 601387, 601388, 601389) *DSH

I BEAN ON SUSPENSION BOLTS CAME UNBOLTED WHILE DRIVING FROM THE FRAME, VEHICLE IS A FOUR WHEEL DRIVE. TT

VEHICLE OUT OF ALIGNMENT, CAUSING FRONT TIRES TO CUP.

FRONT SHOCK ABSORBER FAILED. *AK

FRONT END END MISALIGNED, CAUSING EXCESSIVE WEAR TO TIRES.

FRONT END HAS RIVOTS THAT WILL WEAR OUT IN TIME. CONSUMER CAN NEVER GET VEHICLE ALIGNED CORRECTLY. VEHICLE WILL SHAKE WHEN MAKING TURNS, CONTACTED DEALER. *AK

SUSPENSIONS I-ARMS LOOSE. *DSH

VEHICLE PULLS TO THE RIGHT WHILE DRIVING DUE TO ALIGHMENT PROBLEM THAT CANNOT BE FIXED, CAUSES LOSS OF VEHICLE CONTROL. PLEASE ADD FURTHER DETAILS. *AK

WHEN MAKING A TURN AT LOW SPEEDS, THE STEERING WHEEL SHAKES AND THE VEHICLE MAKES A CLUNKING NOISE. *AK

CONSUMER HAS HAD A CONTINUOUS ALIGNMENT PROBLEM WHICH CAUSED THE VEHICLE PULL TO THE RIGHT. *AK

TWO PIVOT BOLTS LOOSENED AND FELL OFF, CAUSING SUSPENSION SYTEM NOT TO HOLD. PLEASE PROVIDE FURTHER DETAILS. *AK