There are 50 owner-reported driver assist & adas complaints for the 2016 Ford Fusionin NHTSA's database. These are unverified consumer reports and may not reflect confirmed defects.
The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera intermittently operated but was turning on and off. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 83,000.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while in reverse(R), the rear-view camera image failed to display a clear image on the screen. The local dealer was contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The failure mileage was approximately 65,000.
The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse(R), the rear-view camera became inoperable. The contact stated that the rear-view camera image failed to function properly, and the image was blurry. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The vehicle was taken to several dealers, where it was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 61,253.
The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rear-view camera became inoperable. The contact stated that the rear-view camera image was blank. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was not contacted. The vehicle was not diagnosed or repaired. The manufacturer was not made aware of the failure. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The approximate failure mileage was 133,218.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
See attached document for complaint.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The local dealer was contacted and confirmed that the part to repair the vehicle was not yet available. The vehicle was not diagnosed or repaired. The manufacturer was not contacted. The contact had not experienced a failure.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The vehicle was taken to the dealer; however, the vehicle was not diagnosed or repaired. The dealer confirmed that parts were not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The contact stated that while reversing, the rear-view camera displayed a blank image. The message "Camera Unavailable" was displayed. The dealer was contacted and informed the contact that the recall part was only available for Ford Mustang vehicles. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the failure. The failure mileage was approximately 90,000.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The contact stated that the rear-view camera displayed a white screen while the vehicle was in reverse(R). The message "Rear-view Camera Unavailable," was displayed on the center screen. The contact stated that the failure obstructed the driver's ability to safely operate the vehicle. The local dealer was not contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown.
The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the rearview camera image appeared blank, and the message “Camera not Available” was displayed. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the parts were not yet available for the repair. The dealer was contacted and confirmed that parts were not available and that a second recall notification letter would be issued once the remedy became available. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the failure. The approximate failure mileage was 25,000.
The contact owns a 2016 Ford Fusion. The contact stated that while the vehicle was in reverse(R), the rearview camera image failed to display properly, and a caution message was displayed. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to complete the recall repair was not yet available. The vehicle was taken to the dealer, but the vehicle was not diagnosed or repaired. The dealer confirmed that the part was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the infotainment system had become inoperable due to the failure, and the contact considered the infotainment system failure hazardous and unsafe while driving. The manufacturer was not made aware of the failure. The approximate failure mileage was 97,000.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION). The contact stated that the rearview camera displayed a distorted image while the vehicle was in reverse(R). The contact stated that the failure obstructed the driver's visibility, which prevented the driver from safely operating the vehicle. The message "Rear-view Camera Unavailable" was displayed on the screen. The local dealer was contacted; however, the part to do the recall repair was not yet available. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was not made aware of the issue. The failure mileage was unknown.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The contact stated that while shifted in reverse(R) on several occasions, the rear-view camera did not operate as intended and the screen was black. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was approximately 51,000.
The contact owns a 2016 Ford Fusion. The contact stated that while attempting to reverse, the rearview camera became inoperable. The contact stated that the image appeared distorted. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The dealer was contacted and confirmed that the parts were not yet available for the recall repair. The vehicle was not repaired. The manufacturer was made aware of the failure. The approximate failure mileage was 91,000.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The contact had not experienced a failure.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention). The contact stated that on several occasions, while in reverse(R) the rear-view camera malfunctioned. The contact stated that the display screen went black and, while visible, the image was distorted or was flipped horizontally, right to left instead of left to right. The vehicle was not diagnosed or repaired. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was notified of the failure. The failure mileage was approximately 86,600.
The contact owns a 2016 Ford Fusion. The contact stated that while reversing, the back over prevention camera failed to operate as needed, with a black screen displayed. The failure prevented the driver from seeing obstacles behind the vehicle, creating a safety hazard. The contact received notification of NHTSA Campaign Number: 25V695000 (BACK OVER PREVENTION); however, the part to do the recall repair was not yet available. The local dealer was contacted. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The manufacturer was made aware of the issue. The failure mileage was 91,281.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that while in reverse, the back over prevention screen failed to display the view in the rear of the vehicle, but only displayed a black, blue, or other solid color on the screen. The dealer was contacted, and it was confirmed that the repair was only available for Mustang vehicles. The manufacturer was not made aware of the issue. The failure mileage was approximately 99,000.
The contact owns a 2016 Ford Fusion. The contact received notification of NHTSA Campaign Number: 25V695000 (Back Over Prevention); however, the part to do the recall repair was unavailable. The contact stated that the manufacturer had exceeded a reasonable amount of time for the recall repair. The contact stated that the back-over prevention camera was displaying a failure and a message to take the vehicle to be serviced. The camera failed to display an image of the rear of the vehicle. The dealer was contacted and confirmed that parts were not yet available. The manufacturer was not made aware of the issue. The failure mileage was approximately 42,000.
Showing 1–20 of 50 complaints
Complaints are unverified consumer reports submitted to NHTSA. A high complaint count may reflect vehicle popularity, not defect severity. Data sourced from NHTSA public records.
Data synced from NHTSA on Apr 25, 2026